Table of Contents
Advertisement
PROBLEM
OVEN WILL NOT
COME ON
CONTROL PANEL
LIGHTED, YET OVEN
WILL NOT START
"Error" APPEARS
ON DISPLAY
• Steam or vapor escaping from around the door.
• Light reflection around door or outer case.
• Dimming oven light and change in blower sound
may occur while operating at power levels other
than high.
If you need more help...call, toll free: GE Answer Center
28
QUESTIONS?
USE THIS PROBLEM SOLVER
POSSIBLE CAUSE
• A fuse in your home may be blown or the circuit breaker tripped.
Replace fuse or reset circuit breaker.
• Unplug your microwave oven, then plug it back in.
• Make sure 3-prong plug on oven is fully inserted into wall receptacle.
• Door not securely closed.
• START pad must be touched after entering cooking selection.
• Another selection entered already in oven and CLEAR/OFF pad not touched
to cancel it.
• Make sure you have entered cooking time after touching MICRO COOK pad.
• CLEAR/OFF pad was touched accidentally. Reset cooking program and
touch START pad.
• Make sure you entered a code number after touching COOK or the weight
after touching AUTO DEFROST.
• During Cook, Reheat or Popcorn program, the door was opened before
steam could be detected, or steam was not detected in maximum time.
All these things are normal with your microwave oven:
• Dull thumping sound while oven is operating.
• Some TV-Radio interference might be noticed while
using your microwave oven. It's similar to the
interference caused by other small appliances and
does not indicate a problem with your oven.
®
/ 800.626.2000 / consumer information service
Advertisement
Table of Contents
