Panasonic et-jpf100be Operating Instructions Manual page 9

Mounting procedure (continued)
Opening
Protrusion
Power supply unit
Tab
<AC IN>
socket
3) Mount the fl oor stand to the projector.
 Align the opening in the fl oor stand with the
position of the protrusion on the projector.
4) Slide the fl oor stand.
 Slide the fl oor stand so that the tab fi ts into
place into the <AC IN> socket side of the power
supply unit of the projector.
5) Secure the fl oor stand with the screws, captive
washers.
 Firmly secure the fl oor stand with the four
supplied screws, captive washers (M4 x 8).
ENGLISH - 9