Scanner Settings (Scan Parameters) - Panasonic DP-180 Network Scanner Operations

■ Printer Settings (For Key Operator) (Continued)
No.
Modes
03 ERROR PAGE PRINT
04 SPOOL FUNCTION
05 TEXT PRINT
PS CONFIGURATION *
06
FONT LIST PRINT (PCL) *
07
FONT LIST PRINT (PS) *
08
MAILBOX DATA HOLD *
09
DELETE MAILBOX *
10
APPLETALK ZONE *
12
*
1
Available only when the optional Multi Page Description Language Controller Module is installed.
*
2
Available only when the optional Printer Controller Module is installed.
*
3
Available only when the optional Hard Disk Drive Unit is installed.

■ Scanner Settings (Scan Parameters)

No.
Modes
00 SCANNER SETTINGS
01 ORIGINAL MODE
02 COMPRESSION MODE
03 RESOLUTION
05 FILE TYPE/NAME
Select whether to print the error page.
1:OFF / 2:ON
Select whether to enable the spool function.
1:OFF / 2:ON
Select whether to print the text page only.
1:OFF / 2:ON
1
Prints the PS configuration page.
PRESS SET TO PRINT
2
Sets the PCL printing font list.
PRESS SET TO PRINT
1
Sets the font list print of PS.
PRESS SET TO PRINT
3
Select the automatic holding time frame for the
mailbox data.
Infinity / 1 DAY / 2 DAYS / 3 DAYS / 4 DAYS /
5 DAYS / 6 DAYS / 7 DAYS
3
Select whether to delete the mailbox data.
1:ALL / 2:BEFORE
1
Inputs a AppleTalk zone name.
Prints the scanner settings.
PRESS SET TO PRINT
Sets the original default setting.
1:TEXT / 2:TEXT/PHOTO / 3:PHOTO
Sets the default compression mode setting.
1:MH / 2:MR / 3:MMR / 4:JBIG
Sets the default resolution setting.
1:STANDARD 2:FINE 3:S-FINE
Selects the XMT default file format.
1:TIFF/JPEG / 2:PDF
Function
Function
Initial
Setting
2:ON
2:ON
2:ON
7 DAYS
2:BEFORE
Initial
Setting
2:TEXT/PHOTO
4:JBIG
2:FINE
1:TIFF/JPEG
41