Table of Contents
Advertisement
Hardware installation
Procedure
To install and connect up the CP 1623 follow the steps outlined below:
Note
When handling the communications processor, make sure that you do not touch the
connectors or the electronic components.
1. Turn off the PC and pull out the power cable connector from the socket.
2. Open the PC housing as described in the manual for your PG/PC and remove the cover
of a free PCIe slot in your PC.
3. Insert the CP 1623 in the PCIe slot.
Make sure that the CP 1623 is inserted and secured correctly.
4. Close the PC housing as described in the manual accompanying your PG/PC.
5. Plug the connecting cable (twisted pair) into one of the two jacks on the front panel of the
CP 1623.
6. Plug the power supply connector into the socket again and turn on the PC.
7. Optional: If required, connect the external power supply with the supplied or a compatible
plug-in connector.
16
Operating Instructions, 08/2016, C79000-G8976-C304-02
CP 1623
Hide quick links:
Advertisement
Table of Contents
