Preparation; Before Switching On Your Tv; Power Connection; Aerial Connections - JVC AV28BH7ENS Service Manual

Preparation

Place TV on a solid surface.
For ventilation, leave a space of at least 10 cm free all around
the set. To prevent any fault and unsafe situations, please do
not place any objects on top of the set.

Before Switching on your TV

Power connection

Important: The TV set is designed to operate on 220-240 V
AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room
temperature before you connect the set to the mains.

Aerial Connections

• Connect the aerial plug to the aerial input socket located at
the back of the TV.

How to connect the external equipments

See “Connect the External Equipments” on page 12.
• See the instruction manuals provided with the external de-
vices too.

Inserting batteries in the remote control handset

• Remove the battery cover located on the back of the hand-
set by gently pulling upwards from the indicated part.
• Insert two AAA (R03) or equivalent type batteries inside.
• Replace the battery cover.
NOTE: Remove batteries from remote control handset when it is
not to be used for a long period. Otherwise it can be damaged
due to any leakage of batteries.

Switching the TV ON/OFF

You can operate your TV either using the remote control
handset or directly using the TV onset buttons.

To switch the TV on

Your TV will switch on in two steps:
1- Press the power button located on the front of the TV. Then
the TV switches itself to standby mode and the RED LED
located below the TV turns on.
2- To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a program-
me number is selected,
or,
Press Standby / Power Button or Programme Up and Down
buttons on the front of the TV or on the remote control re-
spectively, so the TV will switch on and the RED Led will turn
GREEN.
IMPORTANT:
• If no aerial signal is received at the selected program for a
period of 5 minutes then your TV automatically switches
into stand-by mode.

To switch the TV off

• Press the stand-by button on the remote control, so the TV
will switch to stand-by mode and the GREEN LED will be-
come RED,
• Press the power button located on the front of the TV.
NOTE: If you have switched of the TV set from the power but-
ton instead of the remote control, next time you press the
power button, the TV set will switch on without going to the
stand-by mode.

Initial Settings

When the TV is first turned on, it enters the initial setting
mode, and the AUTOSTORE menu is displayed. Follow the
instructions below to do the initial settings.
• The AUTOSTORE menu does not appear when your TV has
been turned on once. In this case, use the "LANGUAGE",
"COUNTRY" and "AUTOSTORE" items in the INSTALL
menu to make the initial settings. For details, see "Installa-
tion Menu" on page 7.
• If you want to do the initial settings later, press STANDARD
button to turn the menu off.
1. Press " " or "
guage) item. Then press the “ ” or “ ” button to enter the
"LANGUAGE" sub-menu.
2. Press " " or "
press the “ ” or “ ” button to store it.
3. Press the MENU button to return to the AUTOSTORE
menu.
4. Press " " or "
Then press the “ ” or “ ” button to enter the "COUNTRY"
sub-menu.
ENGLISH - 4 -
or,
" button to select "LANGUAGE" (lan-
" button to select a language. Then
" button to select "COUNTRY" item.