Wrap And Flag Labels For Cables - Epson LW-700 Quick Start Manual

Note: For more information about labels with
barcodes and QR codes, see the online User's
Guide.

Wrap and flag labels for cables

Use wrapped labels for tight spaces or when
only a short identifier is necessary. Flag
labels provide a larger surface for multiple
lines of text.
Wrap: H
Wrap: V
1. Press .
2. Use the button to highlight the type
of label you want, then press
select it.
3. Select the length of the label.
4. Enter the label text.
5. When you're ready, press
22 | Specialty Labels
Flag: V
Flag: H
to
to print.
Cable label tips
■
When adhering a flag label to the cable,
loop the label around the cord loosely
and stick the ends of the label together,
then move inwards toward the cable.
This makes it easier to align the ends.
■
If space is limited, use narrower tapes
(such as 9 mm and 6 mm widths).
■
For small cables (1-2 mm), use a flag label
to increase readability.
■
For wrap labels, repeat a single line of
text on multiple lines to improve
readability.
■
Use multiple wrap labels on a single cord
to include more information.
■
Include a wrap label on both ends of the
cable.
■
Do not use a regularly printed label
(lengthwise) as a wrap label — bending