Tv System - Panasonic Diga DMR-ES20 Operating Instructions Manual

Changing the unit's settings
Refer to the control reference on page 33.
Auto-Setup Restart, Download from TV
You can restart auto channel setting if Preset Download or Auto-
Setup (➔ page 10, 11) fails for some reason.
After performing steps 1–4 (➔ page 37)
■ Auto-Setup Restart
5
Press [e, r] to select "Auto-Setup
Restart" and press [ENTER].
The confirmation screen appears.
6
Press [w, q] to select "Yes" and
press [ENTER].
7
Press [e, r, w, q] to select a country
and press [ENTER].
■ Download from TV
5
Press [e, r] to select "Download from
TV" and press [ENTER].
The confirmation screen appears.
6
Press [w, q] to select "Yes" and
press [ENTER].
Download starts.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
Tuner System/List of TV Reception Channels
RF converter output: Not provided
Tuner Channel
System Coverage
PAL-BGH,
CCIR
SECAM-BG
SECAM-L,L' France
List of TV Reception Channels
Channel
Indication
Germany/Italy
2-4
E2-E10
5-10
E11-E12
11-12 (Germany)
H1-H2 (Italy)
13-20 A-H (Only Italy)
21-69 E21-E69
74-78 S01-S05
80 S1
81-89 S2-S10
90-99 S11-S0
S21-S41
121-141
(Hyperband)
Only for 8 MHz channel raster
RQT8212
38
VHF UHF CATV
E2-E12, S01-S05 (S1-S3)
A-H2 21-69 S1-S20 (M1-U10)
(Italy) S21-S41
B-Q
(100.5 to 299.5 MHz)
2-10 21-69
S21-S41
(299.5 to 467.25 MHz)
TV Channel
France Other Countries
2-4
5-10, G-J
(172.00 to
220.00 MHz)
E2-E12
(INTER BANDE)
–
– –
E21-E69 E21-E69
– S1-S5
– M1
B-F (100.00 to
172.00 MHz) M2-M10
(INTER BANDE)
K-Q (220.00 to
300.00 MHz) U1-U10
(INTER BANDE)
S21-S41 (299.25
S21-S41
to 467.25 MHz)
(Hyperband)
(INTER BANDE)

TV System

Change this setting if you connect an NTSC television or to record
NTSC video from another source.
1
While stopped
Press [FUNCTIONS].
2
Press [e, r] to select "To Others" and
press [ENTER].
3
Press [e, r] to select "SETUP" and
press [ENTER].
4
Press [e, r] to select "Connection"
and press [q].
5
Press [e, r] to select "TV System"
and press [ENTER].
6
Press [e, r] to select the TV system
and press [ENTER].
TV System
SETUP
PAL
NTSC
Tuning
Disc
Picture
•
PAL (factory preset)
– Select when connecting to a PAL or Multi-system
television. Programmes recorded using NTSC are played
as PAL 60.
– Select to record television programmes and PAL input from
other equipment.
•
NTSC
– Select when connecting to a NTSC television. Television
programmes cannot be recorded properly.
– Select to record NTSC input from other equipment.
The confirmation screen appears.
7
Press [w, q] to select "Yes" and
press [ENTER].
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
■ To change the setting all at once (PAL←→NTSC)
While stopped, press and hold [g] and [; OPEN/CLOSE] on the
main unit at the same time for about 5 seconds.