Panasonic NV-VHD1EC Operating Instructions Manual page 7

Panasonic VCR
Show View
8 3 5 4 2 - - - -
Panasonic VCR
Timer recording
1/2
Pos VPS
Name Date Start Stop PDC
1. ARD 20/4 15:00 16:00 SP ON
2. - - - - - - -/- - - -:- - - -:- - - - - -
3. - - - - - - -/- - - -:- - - -:- - - - - -
Panasonic VCR
INTELLIGENT TIMER
19/04/02
Pos VPS
Name Date Start Stop PDC
ARD 20/04 15:00 16:00 SP ON
ZDF 21/04 15:00 16:00 SP ON
Panasonic VCR
Timer recording
1/2
Pos VPS
Name Date Start Stop PDC
1. ZDF 21/04 15:00 16:00 SP ON
2. - - - - - - -/- - - -:- - - -:- - - - - -
3. - - - - - - -/- - - -:- - - -:- - - - - -
DVD display
VCR display
RQTD0035-A
Timer recording with ShowView
Switch on and set the TV to the video output channel, insert a cassette with an intact
erasure prevention tab into the VCR and set the remote control to VCR operation.
Press |ShowView|
Enter the ShowView number. For correction use
To access [Timer recording], press |ENTER|.
If the channel name is not set automatically, select the channel [Pos]
The name of channel will be saved. To modify the [Name], see page 10.
Set the tape speed [SP], [LP], [EP] or [A] (automatic).
Check the remaining tape time.
To store the programme, press |ENTER| .
To preset other recordings repeat the procedure.
Press |TIMER| to switch the VCR to Standby mode. Make sure that in the VCR display
is a trademark of Gemstar Development Corporation. The
Gemstar Development Corporation.
Recording with Intelligent Timer Function
To easily set the Timer for programmes often broadcasted on the same channel and time each day (for example series),
the Intelligent Timer Function remembers the channel number along with the start and end times of the last 8 programmes
that you have recorded using Timer recording.
Press | I-TIMER|
To select the programme
Press |TIMER| to switch the VCR to Standby mode for Timer recording. If you want to modify the data first, follow the next steps.
If more than 8 programmes are stored, the oldest data will be lost. To delete recording data manually, press |CANCEL|.
To protect a programme press
To modify the data, press |ENTER| and the [Timer recording] menu will appear.
Change the data .
Press |TIMER| to switch the VCR to Standby mode for Timer recording. For more information, see page 6.
Note: These functions can be also used with the VCR buttons: | INTELLIGENT TIMER|, |TIMER REC |
When [Shipping condition], [Auto - Setup Restart] etc. has been carried out, Intelligent Timer data will be lost.
To use Intelligent Timer Function, at least one timer recording has to be done.
Cancel Standby mode for Timer recording
Press |TIMER| and in the VCR display
Now you can playback a cassette or make a recording.
After that, you must press the button again to switch the VCR to the Standby mode for Timer recording.
Check the Timer recording
Press |PROG/CHECK| to display the [Timer recording] menu.
Press |EXIT| to quit the menu.
Delete or change a Timer recording
Press |PROG/CHECK| to display the [Timer recording] menu.
Use to select the entry to be changed, press |CANCEL| to delete the Timer recording.
Use to select the entry to be changed, press |ENTER|, change entry with
Press |ENTER| to store these changes.
Press |EXIT| to quit the menu or press |TIMER| to switch the VCR to Standby mode.
Synchronous recording
To copy synchronous from the DVD, VCD, CD or MP3 to a VHS tape.
Switch the remote control to DVD
Set the beginning of the scene with Playback
Switch the remote control to VCR
Select the Disc channel (dc) by pressing |AV|
Set the beginning of the recording with
Press |REC|
Start the recording, press Pause
Note: Music or films with copy protection or with the NTSC format can not be recorded.
.
and the lock symbol will appear. To unlock a programme press .
will disappear.
(DVD, VCD, CD, MP3)
.
and Pause
.
, Playback and Pause
(disc will start the playback synchronous).
VCR Recording
and store with |ENTER|.
appears.
system is manufactured under licence from
.
7