Vcr / Dvd Operations - Panasonic NV-VHD1EC Operating Instructions Manual

VCR Operations
Playback (indicated by
Stop (indicated by
To stop winding a tape, recording or playback.
Still Playback (indicated by
Press this button during playback.
Resume normal playback by pressing
this button again or Playback
Slow Playback
Keep this button pressed down for more
than 2 seconds during playback.
Resume normal playback by pressing Playback
Fast Forward and
Forward Search
Fast Rewind and
Backward Search
To select Fast Forward or Fast Rewind,
press these buttons when the video has stopped.
To briefly watch the picture during Fast Forward or Fast
Rewind, hold down the corresponding button.
To search press these buttons briefly during playback,
and the search will continue until Playback
Two times pressing increases search speed (JET SEARCH).
If you keep this button pressed, the search
function will continue until you release the button.
VHS Index Search Function (see page 8)
Remove the cassette.
Press the EJECT button on the unit
or press Stop
Change the Sound mode.
Press this button repeatedly.
Stereo sound:
Left channel:
Right channel:
Mono sound:
Display time, Tape counter or Remaining tape time.
Press this button repeatedly.
Select the VCR channel
and adjust the tracking, see page 23
Reset the Tape counter.
Press this button. When inserting a cassette,
the counter is reset to 0:00.00 .
AV Link Function
see page 11
Select the channel or the ShowView number
Use the numeric buttons.
Example: 18 =
Display the Main menu
VCR Timer Recording Function
(see page 7)
VCR Recording Functions
(see page 6)
VCR Timer Recording Functions
(see page 6, 7)
VCR Timer Recording and Tape Speed Functions
(see page 6, 7)
VCR Programme List and Intro-Jet Scan Function
(see page 8)
Note:
To preserve the video heads, the following functions are switched off automatically after 5 - 10 minutes : Forward Search (Cue), Backward Search (Review),
Jet Search, Still Playback, Slow Playback. (Distorted pictures and tape transport noises during these functions are not functional faults)
RQTD0035-A
)
)
)
.
is pressed.
for more than 3 seconds on the remote control.
OSD Display L R
OSD Display L
OSD Display R
OSD Display - -
DVD Operations
VCR display
.

VCR / DVD Operations

Playback
(indicated by )
Restart from the memorized position
Playback Stop Resume
(press button 1x)
Playback Stop
(press button 2x)
(indicated by )
Playback Pause (indicated by
Slow-motion playback
Keep this button pressed down while paused.
Slow playback forward
Slow playback backward
Resume normal playback by pressing
Playback .
Forward Search
Backward Search
ADVANCED SURROUND:
Playback if you are using 2 front speakers
BASS PLUS: If you connected a subwoofer
PICTURE: Enhances detail in dark scenes
DIALOGUE ENHANCER: Increases the volume
of the dialogue sound
Reselect or store this settings
Skip chapters or tracks
Remove the disc.
Press the OPEN/CLOSE button on the unit
or press Stop for more than 3 seconds on the remote control.
Change audio soundtrack / language
Press AUDIO during playback. The soundtrack changes
each time you press the button (see page 19).
Call up the OSD-screens
Call up the top menu of a disc
Call up the menu of a disc
Return from DVD SETUP menu to playback
Select language of subtitles (see page 17)
Call up the PLAYLIST menu (see page 15)
Call up the DVD SETUP menu (see page 18)
REC CHECK
Check the VCR recording status. For a moment the Timer
recording menu or an Info box appears on the OSD.
Not for DVD OUT (see page 12)
Repeat Playback (see page 16)
A-B Repeat Playback (see page 16)
DVD display
)
5