Advanced Timer Recording; Code; (Analogue Broadcast Only); Manually Programming Timer Recordings - Panasonic Diga DMR-EX79 Operating Instructions Manual

Advanced timer recording

[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
≥You can enter up to 32 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
[RAM] [-RW‹V›] [+R] [+RW]
≥To use a new disc, formatting is necessary.
Preparation
≥Turn on the television and select the appropriate video input to
suit the connections to this unit.
≥If recording to DVD, insert a disc that you can use for recording
( 10, 13).
≥Make sure that the clock settings are correct (
Using G- system to make timer

CODE

recordings (Analogue broadcast only)
G-code is a registered trademark of
Gemstar Development Corporation. The
G-
CODE
license from Gemstar Development
Corporation.
Entering G- numbers is an easy way of timer recording. You
CODE
can find these numbers in TV listings in newspapers or magazines.
Note
The G- system is not supported for digital broadcasts.
CODE
1
Press [G-Code].
G-Code Remain HDD 30:24 SP DVD
Record
TUE 14.10.09. 12:53:00
Input G-Code Number 0-9, and press OK.
2
Press the numbered buttons to enter
the G- number.
CODE
Press [2] to move back to correct a digit.
3
Press [OK].
Timer Remain HDD 30:24 SP DVD
Recording
TUE 14.10.09. 12:53:00
HDD
Channel Date Start Stop Mode
DVD
1 ARD 15. 7. TUE 16:00 17:00 HDD SP
All Channels : ARD
Programme Name
≥Confirm the programme (start and end time) by using a TV
magazine, etc. and make corrections if necessary using
[3, 4, 2, 1] ( right column, step 3).
≥When "-- ---" appears in the "Channel" column, you cannot
set timer recording. Press [3, 4] to select desired
programme position. After you have entered the information
of a TV station, it is kept in the unit's memory.
4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
Timer icon
"F" lights on the unit's display to indicate timer recording
standby has been activated.
TUE 14.10.09. 12:56:00
HDD
Drive
Stop Mode space
DVD
17:00 SP
OK
HDD
rogramme
Repeat steps 1–4 to programme other recordings.
Press [Í] to turn the unit off.
64).
system is manufactured under
1:58 SP
1:58 SP
No. Channel

01
ARD
Check to make sure "OK" is
displayed ( 25).
Manually programming timer
recordings
1
Press [PROG/CHECK].
Timer Remain HDD 30:24 SP DVD
Recording
TUE 14.10.09. 12:54:00
HDD
No. Channel Date Start Stop DVD Mode
New Timer Programme
2
Press [3, 4] to select "New Timer
Programme" and press [OK].
3
Press [1] to move through the items
and change the items with [3, 4].
Timer Remain HDD 30:24 SP DVD
Recording
TUE 14.10.09. 12:54:00
HDD
Channel Date Start Stop Mode
DVD
1 ARD 15. 7. TUE 22:00 22:30 HDD SP
All Channels : ARD
Programme Name
≥When "Channel" is selected, you can press the "Blue" button
to change the category [e.g., Free TV, Radio, Favourite
( 59)] and then press [3, 4] to select the channel you
want to record.
≥Press and hold [3, 4] to alter the Start (Start time) and Stop
(Finish time) in 30-minute increments.
≥You can also set Channel (Programme position/TV Station
Name), Date, Start (Start time), and Stop (Finish time) with
the numbered buttons.
≥Date
[. Date: Current date up to one month later minus
l
one day
;:
l
Daily timer: SUN-SAT>MON-SAT>MON-FRI
l
;:
l
a. Weekly timer: SUN>--->SAT
Titles recorded using the same daily or weekly timer are
bundled and displayed as a "group" in the
DIRECT NAVIGATOR screen (
Auto Renewal Recording.
≥You can also press [DRIVE SELECT] to select the recording
drive.
When the recording drive is "DVD" and there is not enough
remaining space, recording automatically switches to the
"HDD" ( 24, Relief Recording).
≥You can also press [REC MODE] to change the recording
mode.
≥[HDD] RENEW (Auto Renewal Recording) (
ON!)OFF
≥Programme Name
Press [2, 1] to select "Programme Name" and press [OK].
( 44, Entering text)
4
Press [OK].
The timer programme is stored and the timer icon is
displayed.
Timer icon
"F" lights on the unit's display to indicate timer recording
standby has been activated.
TUE 14.10.09. 12:56:00
HDD
Drive
Stop Mode space
DVD
22:30 SP
OK
HDD
ogramme
Repeat steps 2–4 to programme other recordings.
Press [Í] to turn the unit off.
1:58 SP
Drive
space
1:58 SP
29) except when using
24)
No. Channel

01
ARD
Check to make sure "OK" is
displayed ( 25).
RQT9306
23