To Cancel Recording When Recording Has Already Begun; To Release The Unit From Recording Standby; Notes On Timer Recording - Panasonic Diga DMR-EX77 Operating Instructions Manual

Timer recording
DRIVE
SELECT
DELETE ¢
∫
3,4,2,1
OK
OPTION
"Red"
RQT8859
32
DVD
TV
Í
Í
VOL
CH
DRIVE
SELECT
AV
PAGE
3
1 2
CH
4 5 6
ANALOGUE
7 8 9
CH
G-Code
DELETE INPUT
0
SELECT
SKIP
SLOW/SEARCH
PAUSE PLAY/x1.3
STOP
EXIT
STATUS
OK
OPTION RETURN
CREATE
AUDIO DISPLAY
CHAPTER MANUAL SKIP
REC REC MODE TIME SLIP PROG/CHECK
PROG/CHECK
To cancel recording when recording
has already begun
1
While the unit is on
Press [DRIVE SELECT] to select the
recording drive and press [∫].
Stop Recording
Timer recording in progress.
Stop this timer recording?
It will be cancelled if you stop.
Cancel
Stop Recording
SELECT
RETURN
OK
2
Press [2, 1] to select "Stop
Recording" and press [OK].
If you stop a timer recording, it will be cancelled. However, if
you have set a weekly or daily timer recording, the recording
will start from the next time the timer recording is set.
To release the unit from recording
standby
≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
1
Press [PROG/CHECK].
2
Press [3, 4] to select the programme
and press the "Red" button.
≥The timer icon "F" (➡ 33) disappears from the timer
recording list.
≥You cannot cancel timer recording standby mode as long as
even one timer icon "F" (➡ 33) remains in the timer
recording list.
≥Press the "Red" button again to activate timer recording
standby.

Notes on timer recording

≥When a timer recording is set, DVDs that were recorded using a
different TV system cannot be played unless the TV system is
changed in the Setup menu (➡ 72) or the timer recording has
completed or has been cancelled.
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even when
playing.
≥Timer recordings do not begin while editing or copying in normal
speed mode (➡ 51).
≥If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
≥If the unit is not put in the timer recording standby mode at the last
10 minutes before the programmed timer recording starting time,
the "F" flashes on the unit's display.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
Programme
Programme
Recorded Recorded
Not recorded