Panasonic Diga DMR-EX77 Operating Instructions Manual page 16

STEP 1 Connection
Other connections
§
Leave "Yellow" unconnected.
Connecting a television with S VIDEO terminals
The S VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the television.)
Television's rear panel
Audio/Video cable
(included)
NENT
OUT
This unit's rear panel
Connecting an amplifier or system component
∫ Connecting an amplifier with a digital input
terminal
≥To enjoy multi-channel surround sound DVD-Video, connect an
amplifier with Dolby Digital, DTS and MPEG decoders.
[Required]setting]
"Digital Audio Output" in the Setup menu (➡ 66)
≥When this unit is connected to an amplifier with an Optical digital
audio cable and connected to a television with an HDMI cable, you
can enjoy the highest quality of audio from the disc by setting
"Digital Audio Output" to "Optical Only" in the Setup menu (➡ 67).
In this case audio is only output from the amplifier not the
television.
≥Before purchasing an optical digital audio cable (not included),
check the terminal shape of the connected equipment.
≥You cannot use DTS Digital Surround decoders not suited to DVD.
Amplifier's
rear panel
Optical digital
audio cable
Do not bend
sharply when
connecting.
RQT8859
16
S VIDEO
AUDIO IN VIDEO
IN
R L IN
Red White
§
S Video
cable
§
Red White
R-AUDIO-L VIDEO S VIDEO A A V OU V OUT T
OPTICAL IN
Insert fully, with this
side facing up.
Y
P
B
AV1
( TV )
P
OPTICAL R
DIGITAL AL AUDIO OU DIGI UDIO OUT COMPONENT COMPONENT
(PCM/BITSTREAM) (PCM/BITSTREAM) VIDEO OUT VIDEO OUT AV2 ( EXT )
This unit's rear panel
Connecting a television with COMPONENT VIDEO
terminals
Television's rear panel
Y COMPONENT
VIDEO IN
P B
P
R
Component
Video cable
RF RF
Y
IN IN
P
B
P
RF RF OPTICAL R
OUT OUT
DIGI DIGITAL AL AUDIO OU UDIO OUT COMPONENT COMPONENT
(PCM/BITSTREAM) (PCM/BITSTREAM) VIDEO OUT VIDEO OUT AV2 ( EXT )
COMPONENT VIDEO terminals can be used for either interlace or
progressive output (➡ 85) and provide a purer picture than the
S VIDEO OUT terminal.
≥Connect to terminals of the same colour.
If you have a regular television (CRT: cathode ray tube)
Use component output with progressive "Off" (The default setting
➡ 67), even if it is progressive compatible, because progressive
output can cause some flickering. This is the same for multi system
televisions using PAL mode.
DO NOT
COMPONENT
VIDEO OUT
Progressive output
This unit
For progressive output (➡ 21)
∫ Connecting a stereo amplifier
Amplifier's rear panel
AUDIO IN
R L
Red White
Audio cable
Red White
R-AUDIO-L VIDEO
This unit's rear panel
AUDIO IN
R L
Red White
§
Audio/Video
cable
§
(included)
Red White
AV1
( TV )
R-AUDIO-L VIDEO S VIDEO
This unit's rear panel
CRT
COMPONENT
VIDEO IN
S VIDEO