Component Video Out; Connecting A Tv With; Progressive Television Picture - Panasonic Diga DMR-ES35V Operating Instructions Manual

COMPONENT VIDEO OUT

TV
COMPONENT
Audioinput L/R
Y
Audio cable
L - White
R - Red
COMPONENTVIDEO OUT
L
S VIDEO OUT
R
DIGITALAUDIO OUT
AUDIO OUT
(PCM/BITSTREAM)
TV Aspect
Setup
Progressive
Tuning
TV System
Disc
Picture AV1 Output
Sound
AV2 Settings
Display
Connection
VHS
SELECT
Others
ENTER
14
COMPONENT VIDEO OUT socket
The sockets can be used for INTERLACE or PROGRESSIVE output and deliver a
clearer picture than the S VIDEO OUT socket.
VIDEO IN Connections via these sockets output the colour difference signals (P /P ) and the
brightness signal (Y) separately.
P P
B R
Colours can be reproduced true to the original colour.
The properties of the COMPONENT VIDEO input socket are dependent on the
Video cable
TV or screen.
Y - Green
PB - Blue
PR - Red
!
Connect the COMPONENT VIDEO OUT sockets of the unit with the
COMPONENT VIDEO IN of the TV unit. Use a Video cable.
!
Always connect sockets with the same colour.
!
Connect the audio cables to the corresponding audio input sockets on the TV.
Y
P
B
P
R
Connecting a TV with COMPONENT VIDEO input sockets
If your TV with LCD or plasma screen supports the progressive process, connect it
to the COMPONENT VIDEO OUT sockets.
If you want to enjoy full progressive video, set Progressive to [On].
!
Press
4:3
!
Select [To Others] with
On
!
Select [Setup]
PAL
!
Select [Connection]
Video
!
Select the option [On] with
!
Press
If the AV1 Output setting in the Setup menu is set to [RGB 1/2 ( without component )],
TAB
there is no output to the COMPONENT VIDEO OUT sockets.
RETURN
Set this option to [Video ( with component )].
If the unit is connected to the TV via the S VIDEO OUT or the AV1 socket,
output is Interlace regardless of the settings

Progressive television picture

The progressive picture aspect ratio (height to width) is set to 16:9. DVD-Video with
a picture aspect ratio
image page ratio of 4:3 is shown stretched from right to left. If it is possible to adjust
the picture aspect ratio
With a normal television, the progressive output can cause the picture to flicker,
even if the television is progressive-compatible.
Select the setting [Progressive - Off].
Progressive-compatible televisions (PAL)
LCD/plasma television or LCD projector
If progressive output is used, videos can be viewed
in High Resolution, for example from DVD-Video.
COMPONENT VIDEO OUT on this unit is connected
with the COMPONENT VIDEO IN on the television.
Select the [Progressive - On] setting.
COMPONENT
VIDEO OUT
COMPONENTVIDEO OUT
DVD-Recorder
FUNCTIONS .
and confirm with
with and confirm with
with , [Progressive] with
and confirm with
RETURN multiple times to return to the television picture.
of 16:9 is properly displayed. However, video material with an
on your television, select the setting [Progressive - On].
Y
P
B
P
R
Progressive output
COMPONENT
VIDEO IN
ENTER .
ENTER .
, and confirm with
ENTER .
.
Conventional televisions
On a normal television, Progressive output can
cause flickering even if the television is
Progressive-compatible.
Select the [Progressive - Out] setting.
COMPONENT
VIDEO OUT
Y
COMPONENTVIDEO OUT
P
B
P
R
COMPONENT
VIDEO OUT
Progressive output
DVD-Recorder
B R
ENTER .
50
50
COMPONENT
VIDEO IN