Troubleshooting Guide - Panasonic Diga DMR-ES10 Operating Instructions Manual

Troubleshooting guide

Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart
do not solve the problem, refer to the "Customer Services Directory" on page 42 if you reside in the U.S.A., or refer to the "Product information" on
page 41 if you reside in Canada.
The following do not indicate a problem with this unit:
•
Regular disc rotating sounds. The sound of the disc rotating may
become louder especially when finalizing a DVD-R,
DVD-RW (DVD-Video format) or +R.
•
Poor reception due to atmospheric conditions.
•
Image disturbance during search.
Power
No power.
The unit switches to the
standby mode.
Displays
The display is dim.
"12: 00A" is flashing on the
unit's display.
Compared to the actual
recorded time, the remaining
time displayed is less.
The time recorded on the disc
and the available time shown
do not add up.
The play time shown for MP3
does not agree with the actual
time.
TV screen and video
Television reception worsens
after connecting the unit.
Status messages do not
appear.
The blue background does
not appear.
The 4: 3 aspect ratio picture
expands left and right.
Screen size is wrong.
There is a lot of after-image
when playing video.
When playing DVD-Video
using progressive output, one
part of the picture
momentarily appears to be
doubled up.
There is no apparent change
in picture quality when
adjusted with the Video menu
in the on-screen menus.
The images from this unit do
not appear on the television.
Picture is distorted.
•
Insert the AC power supply cord securely into a known active AC outlet.
•
This is a power saving feature. Change "Off Timer" in the SETUP menu, if you would prefer.
•
One of the unit's safety devices is activated. Press [POWER ^/I] on the main unit to turn the unit
on.
•
Change "Front Display" in the SETUP menu.
•
Set the clock.
•
The displayed recording/play time is converted from the number of frames at 29.97 frames
(equal to 0.999 seconds) to one second. There will be slight a difference between the time
displayed and the actual elapsed time (e.g., actual one-hour elapsed time may display as
approximately 59 minutes 56 seconds). This does not affect the recording.
•
Times shown may disagree with actual times.
•
Even if you erase recorded content from the DVD-R or the +R, there is no increase in disc
space.
•
Available recording space on a DVD-RW (DVD-Video format) increases only when the last
recorded title is erased. It does not increase if other titles are erased.
•
More disc space than the actual recording time is used after recording or editing the DVD-R or
the +R 200 times or more.
•
While searching, the elapsed time may not display correctly.
•
This can occur because the signals are being divided between the unit and other equipment. It
can be solved by using a signal booster, available from audio-visual suppliers.
•
Select "Automatic" in "Status Messages" in the SETUP menu.
•
Select "On" in "Blue Background" in the SETUP menu.
•
Use the television to change the aspect. If your television does not have that function, set
"Progressive" in the Video menu to "Off".
•
Check the settings for "TV Type", "4:3 TV Settings for DVD-Video" or "4:3 TV Settings for DVD-
RAM" in the SETUP menu.
•
Set "MPEG-DNR" in the Video menu to "Off".
•
Set "Progressive" in the Video menu to "Off". This problem is caused by the editing method or
material used on DVD-Video, but should be corrected if you use interlace output.
•
The effect is less perceivable with some types of video.
•
Make sure that the television is connected to the VIDEO OUT terminal, S VIDEO OUT terminal
or COMPONENT VIDEO OUT terminals on this unit.
•
Make sure that the television's input setting (e.g., VIDEO 1) is correct.
•
The television isn't compatible with progressive signals. Press and hold [g] and [q (PLAY/x1.3)]
on the main unit at the same time for about 5 seconds. The setting will change to interlace.
•
Interruptions in reception due to periodic satellite broadcasting
breaks.
•
Operations do not work due to a poor-quality disc. (Try again using
a Panasonic disc.)
•
The unit freezes due to one of its safety devices being activated.
(Press and hold [POWER 8] on the main unit for 10 seconds.)
Page
7, 8
32
—
33
34
—
—
—
—
—
—
—
33
33
25
33
25
25
—
7, 8
—
—
RQT8009
39