Connection Suggestions (Optional); If You Have Antenna - Sceptre E246 Manual

Connection Suggestions (OPTIONAL)

If You Have Antenna...

1. Make sure the power of Sceptre HD Display is turned off.
2. Connect the Coaxial RF cable from your antenna to the DT port on the
back of your HD Display.
3. Turn on the HD Display.
4. Follow the first time on screen instructions.
Please Note:

Not all broadcasts are in Full High Definition (HD). Please refer to
your local broadcasting stations for more information.

The HD Display's tuner is designed for HD Display therefore
requires a stronger signal than normal Displays. If you cannot
achieve that signal level with your antenna or cable, your HD
Display might lose picture or sound.
- 18 -
www.SCEPTRE.com
SCEPTRE E246 HD Display User Manual