Option - Panasonic NV-VP32 Series Operating Instructions Manual

Settings Using the On-Screen Display

OPTION

VOLUME
CH
AUDIO
AUDIO
AV
VHS/DVD
VHS DVD
TRACKING/V-LOCK
CANCEL/ CANCEL/RESET PLAY SPEED
-/- -
RESET
SLOW/
INDEX/SKIP REW SEARCH FF
PLAY
SLOW
NAVI MENU
DIRECT NAVIGATOR PLAY LIST
TOP MENU
ENTER
DISPLAY RETURN
PROG/CHECK I-TIMER
AV ENHANCER P.MEMORY PLAY MODE SET UP
DVD-RAM
TIMER DUBBING REC MODE REC
JET REW PROG PLAY INPUT SELECT VHS STATUS
GROUP PICTURE MODE QUICK REPLAY DVD STATUS
TAPE SELECT
Set the length of tape you are using so the unit can show the correct
remaining time (l 25).
NTSC INPUT SELECT
Select the colour TV system used to record NTSC signals.
NTSC PB SELECT
Select the colour TV system of the TV used to play back a tape
recording NTSC signals.
JET NAVIGATOR (l 20)
DELETE NAVIDATA (l 20)
OSD (l 25)
OUT [VHS/DVD] (l 12)
You can set the unit so that the output is automatically switched to
the device which starts playback.
DUBBING NORMAL AUDIO (l 42)
Select the audio channel to be recorded on the Normal audio track
when dubbing a bilingual DVD.
24
Press [34] to select the item and press [2 1] to change the
setting.
MENU
¬ To exit the settings screen
Press [MENU] twice.
VHS
STATUS
Items Settings (Underlined items are the initial setting.)
AUTO: E30, E60, E90, E120, E180 and E240 tapes
E195: E195 tapes
E260: E260 tapes
E300: E300 tapes
AUTO: NTSC [4.43] and [3.58] signals
≥If the tape has not recorded correctly, select 4.43 or 3.58.
4.43: NTSC 4.43 signals
3.58: NTSC 3.58 signals
≥Some programmes on NTSC 3.58 system cannot be recorded
correctly at this position.
on PAL TV: TVs that can receive PAL signals
4.43: TVs that can receive NTSC 4.43 signals
3.58: TVs that can receive NTSC 3.58 signals
ON: Jet Navigator data automatically registered.
OFF: Data not registered.
NO
ENTER: If you choose this position, press [ENTER] to delete
all the Jet Navigator data.
AUTO: Messages appear on the TV for about 5 seconds
when you press [VHS STATUS].
OFF: Messages do not appear.
VHS: Only VHS outputs
MANUAL: VHS output and DVD output are manually switched.
AUTO: VHS and DVD are automatically switched depending
on the manipulation or the unit operation.
L: To record the sound from left channel
R: To record the sound from right channel
OPTION
TAPE SELECT [AUTO]
NTSC INPUT SELECT [AUTO]
NTSC PB SELECT [onPALTV]
JET NAVIGATOR [OFF]
DELETE NAVIDATA [NO]
OSD [AUTO]
OUT[VHS/DVD] [AUTO]
DUBBING NORMAL AUDIO [L]
END :MENU
SELECT: