Panasonic PalmCam PV-DC1000 Operating Instructions Manual page 9

Power Supply
AC Adaptor
2
1
Connect DC OUT on the AC Adaptor
to DC IN on the Digital Camera
Station until it locks with a click.
2
Insert the Digital Camera into the
Digital Camera Station until it locks.
POWER
Lamp
DC IN
Connector
3
Plug the AC Adaptor into an AC
outlet.
The POWER Lamp lights up.
Note:
• While not in use, unplug the AC Adaptor
from the AC outlet. Plugged into an AC
outlet, the AC Adaptor consumes 1.5W of
electric power.
1
3
9