Johansson Colosseum 8500D User Manual page 7

After positioning of the unit (wall or table), connect the cables. The unit is preconfigured
for ASTRA 19.2°. Connect the cables as shown in the picture:
1 ASTRA 19.2° Vertical Low
2 ASTRA 19.2° Horizontal Low
3 ASTRA 19.2° Vertical High
4 ASTRA 19.2° Horizontal High
5 Power cord
NOTES
• Connect the 4 cables of a Quad/Quattro LNB to prevent alarm messages.
Some LNB's require a lot of power to work properly. The unit is able to
deliver this power, only when the 4 polarities are connected.
• Do not change the bridges or load resistors!
1 2 3 4
5
7