Table of Contents
Advertisement
Functions
Inspection programs for as many
as 64 product types can be set.
Smart Matching
Detection of sub-pixel position possible with gray
scale matching. In addition, using the gray scale
differential processing function, shape inspection,
etc. can also be carried out simultaneously. Memory
capacity has been increased 4 times over previous
models, allowing support for an even wider range of
applications.
Detects registered
template
Detection Image
Feature Extraction
Features, such as the number of objects, workpieces,
area, central coordinates, angle of the main axis,
projection width or perimeter length can be extracted.
Rotation/Position Adjustment
Highly accurate and reliable inspection is realized by automatically adjusting object orientation
and stop position deviation.
Complicated adjustments are also possible using the multiple adjustment function.
Multiple Adjustment
Search area
Inspection object
Position
adjustment 1
Detection Image
Position
adjustment 2
Upgraded
Improved
Differential Function
Based on the position information obtained by the
matching function, the registered object and detected
object are overlapped and compared on a pixel-by-
pixel basis. Any pixels with a difference in brightness
over a certain level are detected. The area value of
such pixels can then be used to make pass/fail
judgments.
Matching
detection
Difference detected =
Gray Scale Window
An inspection area can be created in a 256 gray
scale image, with a rectangular, circular or polygonal
shape, over the area where object detection is to take
place. An average value for the brightness data (gray
scale value) for all pixels in that area can be
calculated.
Position Adjustment
Rotation Adjustment
Multiple Adjustment
Priority Adjustment
Numerical Calculation/
Judgment Output
The numerical output function has been greatly
simplified so that even a novice can set it easily.
Operation has also become even easier as both
numerical calculations and judgment output can now
be set on the same screen (up to 96 formulas).
Template
NG
360° Contour Matching
Stable position detection is possible even for objects
that overlap because their contours can be extricated.
The range of settings has been doubled and support
has been added for 4 cameras.
Mask
The shape of the inspection area can be set to
match particular targets. Mask area settings
can also be combined to allow efficient
inspections to be carried out only on the
necessary parts.
Previous
PV310
Inspection
area
Mask
Mask
7
Advertisement
Table of Contents
