Table of Contents
Advertisement
User-Friendly Interface
An operation keypad makes configuration as easy as child's play.
The color display is easy to read and allows you to grasp information quickly.
Rich Information Display
The high performance VGA monitor displays inspected objects on the screen with high fidelity. Operations and settings can be
carried out easily via the pull-down menus and keypad.
Readability has been improved by displaying guidelines and character information in color and using a large character font.
In addition, parallel inspection output results can be monitored in color.
Currently Selected Model Number,
Model Title and Shutter Speed
Currently Displayed Image Type
Message Area
Displays various messages, sub-windows for
checker settings and checker test results.
Overall Judgment Result
Displays OK (in green) when the output
judgment meets the judgment requirements
set in "Overall Judgment"
Signal Output Status
When the following signals are output, the
box below each signal is illuminated. (RUN
mode only)
R: READY signal
E: ERROR signal
1~8: D1 to D8 signals
Execution Time
Menu Background Settings
A semi-transparent mode, allowing operations to be carried out while viewing captured images,
and a fill mode, which blocks out background colors, are both supported. You can select the menu
background color and set it as default.
Semi-Translucent Mode
The PV310 can be used for a wide range of applications where high-speed processing is required, e.g.
inspecting:
Applications
Presence/absence of parts
Part size
Part orientation
Presence/absence of date or
serial no.
Product nameplate label
Remote control switch printing
Cap tightness
Status Display Area
Fill Mode
Data Monitor
Up to 50 inspection results can be displayed in
a list on the monitor, allowing the operator to
check the results on the monitor. Threshold
adjustment (upper and lower limit values) can
also be changed on the data monitor without
having to enter them in the settings menu.
The size and display position can also be
changed.
Operation
keypad
Just position the cursor on a
menu item and press
<Enter>.
Logo mark printing
Flat cable width
Label position
Debris/dirt on part
7-segment illumination
Substrate positioning
Metal part picking, etc.
Menu Bar
Displays menus for
setting inspection
conditions and the
inspection environment.
Screen Display Area
<RUN mode>
Displays images, checker
areas, inspection results,
etc. depending on the
settings in Settings Mode.
<Settings Mode>
Displays images, checker
areas, etc.
Settings windows called
from the menu bar are also
displayed in this area.
5
Advertisement
Table of Contents
