Self-Diagnostic Function - Sony kv-36fs100 Service Manual

Trinitron color television

Service manual (249 pages)

Specifications (1 page)

Operating instructions manual (64 pages)

Table of Contents

The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER LED will automatically begin to flash. The number

of times the LED flashes translates to a probable source of the problem. A definition of the STANDBY/TIMER LED flash indicators is listed in the

instruction manual for the user's knowledge and reference. If an error symptom cannot be reproduced, the Remote Commander can be used to review

the failure occurrence data stored in memory to reveal past problems and how often these problems occur.

Diagnostic Test Indicators

When an error occurs, the STANDBY/TIMER LED will flash a set number of times to indicate the possible cause of the problem. If there is more than

one error, the LED will identify the first of the problem areas.

Results for all of the following diagnostic items are displayed on screen. If the screen displays a "0", an error has occurred.

��

� ��

��

Display of Standby/Timer LED Flash Count

2 times

3 times

4 times

5 times

9 times

10 times

LED ON 0.3 sec.

LED OFF 0.3 sec.

Diagnostic Item

+B Overcurrent

+B Overvoltage

V-STOP

IK (AKB)

Zero Cross

*One flash count is not used for self-diagnostic.