Electrical Installation - White-Westinghouse WNGC90JFR User Manual

3. Assemble the burner in a reverse
sequence. Before you fix the screw,
make sure that the burner is pushed
correctly to the back panel.
Test the grill injectors.
Levelling
CAUTION!
Remove all the accessories from the
oven.
1. Open the lid of the appliance and
disassemble the lid, the pan supports
and all the burner assemblies.
2. Put the appliance on the sidewall on a
clean and smooth surface. Place each
foot into a separate hole, in the plinth,
and rotate it counterclockwise.
3. If the floor is not equally flat, use the
adjustable feet on the bottom of the
appliance to set a stable position for the
appliance.
To install all the accessories, do the first
step in an opposite sequence.

Electrical installation

WARNING!
The manufacturer is not responsible if
you do not follow the safety
precautions from Safety chapters.
This appliance is supplied with a main plug
and a main cable.
INSTALLATION
B
37