Configuration Via Software - Memotec mychron 3 User Manual

Configuration via software

As previously mentioned, MyChron 3 may be configured both via keyboard and
via software, by using Race Studio 2.
The "via software configuration" allows the user to configure of his MyChron
3.set some parameters that cannot be set using the keyboard.
It is reminded that, before starting the via software configuration, to install
Race Studio 2 and the USB drivers as mentioned in the previous chapter. It
is also reminded, before configuring the instrument, to connect it to a PC
and to switch it on.
Once launched the program clicking on the Race Studio 2 icon, it will appear the
following screenshot:
44