Table of Contents
Advertisement
5: Motion picture recording stops in the
middle.
• Are you using a MultiMediaCard?
– This unit does not support
MultiMediaCard.
• When you set the picture quality to
[30fpsVGA], we recommend using a
high speed SD Memory Card with
"10 MB/s" or greater displayed on the
package.
• Depending on the type of SD Memory
Card and how many times it has been
recorded onto or deleted, recording
may stop in the middle. If something like
this happens, clean-up may be
effective. We recommend you clean up
the card using the camera in advance.
(P89)
∫ LCD monitor
1: The LCD monitor is turned off
sometimes although the camera is
turned on.
• Have you set to the economy mode?
(P22)
– In the economy mode, the LCD
monitor is turned off while the flash is
charged.
2: The brightness of the screen
becomes dark or bright for a moment.
• This phenomenon appears when
pressing the shutter button halfway to
set the aperture value and does not
affect the recorded pictures.
3: The screen is too bright or dark.
• Adjust the brightness of the screen.
(P21)
• Is the power LCD function activated?
(P25)
4: Some pixels are inactive or always lit
on the LCD monitor.
• These pixels do not affect the recorded
pictures.
This is not a malfunction.
Others
5: Noise appears on the LCD monitor.
• In dark places, noise may appear to
maintain the brightness of the LCD
monitor.
This does not affect the pictures you are
recording.
6: A vertical red line appears on the LCD
monitor.
• This is called smear. It is specific to
CCD, not a malfunction. It appears
when the subject has a bright part. It is
recorded on motion pictures, but not
recorded on still pictures.
∫ Flash
1: Flash is not activated.
• Is the flash setting set to Forced OFF
[
]?
– Change the flash setting. (P37)
• The flash is not activated when in
motion picture mode [
(P57), [NIGHT SCENERY] (P58),
[FIREWORKS] (P61) or [STARRY SKY]
(P62) in scene mode is selected.
2: The flash is activated 2 times.
• When you select AUTO/Red-eye
reduction [
activated for red-eye prevention on the
subject (red-eye phenomenon) before
actually recording pictures. After the
first flash, the flash is activated again for
recording.
], [SCENERY]
], the first flash is
107
VQT0S74
Advertisement
Table of Contents
