Motion Picture Mode - Panasonic Lumix DMC-FX07K Operating Instructions Manual

Motion Picture Mode

1 Press the shutter button halfway
to focus and then press it fully to
start recording.
• When the subject is focused, the focus
indication lights.
• The focus, zoom and aperture value are
fixed to the setting when recording
starts (the first frame).
• The available recording time A is
displayed on the top right and the
elapsed recording time B is displayed
on the bottom right of the screen.
For example, 1 hour 20 minutes and
30 seconds is displayed as
[1h20m30s].
• The available recording time and the
elapsed recording time are
approximations.
• Audio recording starts simultaneously
from the camera's built-in microphone.
• When using the stabilizer function, it is
fixed to [MODE1].
2 Press the shutter button fully to
stop recording.
• If the built-in memory (DMC-FX3) or the
card becomes full in the middle of
recording, the camera stops recording
automatically.
∫ Changing the settings for the aspect
1 Press [MENU/SET].
2 Press 3/4 to select
R 3 s
3 Press 3/4 to select the item and
2s
4 Press 3/4 to select
5 Press 3/4 to select the item and
ratio and the picture quality
[ASPECT RATIO] and then press
1.
REC
W.BALANCE
ASPECT RATIO
PICT.MODE
AF MODE
AF ASSIST LAMP
SELECT SET
then press [MENU/SET].
[PICT.MODE] and then press 1.
REC
W.BALANCE
ASPECT RATIO
PICT.MODE
AF MODE
AF ASSIST LAMP
SELECT SET
then press [MENU/SET].
If you selected [
2
shown in step
Item Picture size
[30fpsVGA]
640k480 pixels
[10fpsVGA]
[30fpsQVGA]
320k240 pixels
[10fpsQVGA]
If you selected [
2
shown in step
Item Picture size
[30fps16:9]
848k480 pixels
[10fps16:9]
• fps "frames per second"; This refers to
the number of frames used in 1 second.
Advanced
/
1
2
AUTO
ON
MENU
/
1
2
AUTO
ON
MENU
] on the screen
fps
30
10
30
10
] on the screen
fps
30
10
63
VQT0Y69