Divert Call To Other Extension Now; Follow Me; Do-Not-Disturb; Night Service - urmet domus Director 2 CL 4091 Instruction Manual

7.8 DIVERT CALL TO OTHER EXTENSION NOW

This function is used to immediately divert all routed to your extension to another extension. A "divert" tone
will be heard when the function is active when you pick up the handset. The telephone can be used to make
calls in any case.
To switch the function on:
• Press 2F followed by F2.
• Dial the number of the extension where to divert calls 41 ÷ 72 for extensions 1 ÷ 32.
• Press the
button to end after you hear the Divert to... message confi rming that the service is active.
To switch the function off:
• Press 2F followed by F2.
• Dial your extension number 41 ÷ 72 for extensions 1 ÷ 32.
• Press the
button to end after you hear the Service not active message confi rming that the service is
not active.
To check the function:
• Press 3F followed by F2.
• Wait for the confi rmation message and press the
The icon will light up on the display to indicate that the divert service is on.
40
button to end.
DS4091-002
8. OTHER FUNCTIONS
8.1 FOLLOW-UP
With this function, all the calls routed to your extension may be diverted to another extension. The service is
activated from the second extension.
Follow-me on:
• Press 2F followed by F5.
• Dial the number of the extension from where you want to divert calls 41 ÷ 72 for extensions 1 ÷ 32.
• Press the
button to end after you hear the Divert to... message confi rming that the service is active.
Follow-me off:
• Press 2F followed by F5.
• Dial your extension number 41 ÷ 72 for extensions 1 ÷ 32.
• Press the
button to end after you hear the Service not active message confi rming that the service is
active.
To check the function:
• Press 3F followed by F5.
• Wait for the confi rmation message and press the

8.2 DO-NOT-DISTURB

This function is used to cut off the ringer of an extension for internal calls, external calls and door phone
calls. In particular, you can defi ne during programming which calls the service applies to so that the system
can fi lter the calls and send a deterrent tone to the caller. Pick up the handset and wait for the divert tone
indicating that the service is on. The telephone can be used to make calls in any case.
To switch the function on:
• Press 2F followed by F6.
• Press the
button to end after you hear the Service active message confi rming that the service is
active.
To switch the function off:
• Press 3F followed by F6.
• Press the
button to end after you hear the Service not active message confi rming that the service is
not active.

8.3 NIGHT SERVICE

This function is used to switch night confi guration of the switchboard on and off. To switch the function on:
• Press 2F followed by the
dedicated button.
• After you hear the Programming value is one message confi rming that the service is active and press
the button to end.
To switch the function off:
• Press the
dedicated button.
• After you hear the Programming value is zero message confi rming that the service is active and press
the button to end.
Either icon or icon will light up on the display to indicate the switchboard state (day or night service,
respectively).
DS4091-002
button to end.
41