Ringer Melody; Display Contrast - urmet domus Director 2 CL 4091 Instruction Manual

3.1.4 RINGER VOLUME
The procedure for adjusting the ringer volume is described below. The default value is 04. The volume may
be set to 5 levels, where 01 is the minimum value and 05 the maximum value.
DESCRIPTION OF THE OPERATION
In stand-by state, press and select
Customization.
Press OK to access the Customization menu.
Press to select Ringer volume.
Press OK to access the Ringer volume menu.
The set value is shown.
Press or to adjust the ringer volume
(e.g. level 02 in the example).
Press OK to confirm.
The Ringer volume menu is shown.
Press or to select the other menu items
or press twice to quit.

3.1.5 RINGER MELODY

The procedure for adjusting the ringer melody is described below. The default value is E. Six tones may be
selected.
DESCRIPTION OF THE OPERATION
In stand-by state, press and select
Customization.
Press OK to access the Customization menu.
Press to select Ringer Melody.
Press OK to access the Ringer Melody menu.
The set value is shown.
Press or to select the ringer tone which is
played at the set volume for a few instants
(refer to § 3.1.4.). Melody D is set in the example
shown).
Press OK to confirm.
The Ringer Melody menu is shown.
Press or to select the other menu items
or press twice to quit.
22
BUTTON DISPLAY
user menu
Customization
Customization
Language
Customization
Ringer volume
Ringer Volume
Volume 03
Ringer volume
Volume 02
Customization
Ringer volume
DD/MM/YYYY HH:MM
twice
BUTTON DISPLAY
user menu
Customization
Customization
Language
Customization
Ringer Melody
Select Melody
Melody [E]
Select Melody
Melody [D]
Customization
Ringer Melody
DD/MM/YYYY HH:MM
twice
DS4091-002

3.1.6 DISPLAY CONTRAST

The procedure for adjusting the display contrast is described below. The default value is 03. The contrast
may be set to 5 levels, where 00 is the minimum value and 04 the maximum value.
DESCRIPTION OF THE OPERATION
In stand-by state, press and select
Customization.
Press OK to access the Customization menu.
Press to select Display Contrast.
Press OK to access the Display Contrast menu.
The set value is shown.
Press or to adjust the display contrast
(e.g. level 02 in the example).
Press OK to confirm.
The Display Contrast menu is shown.
Press or to select the other menu items
or press twice to quit.
3.1.7 RESTORE PARAMETERS (VOLUMES)
The procedure for restoring the default volumes is described below.
DESCRIPTION OF THE OPERATION
In stand-by state, press and select
Customization.
Press OK to access the Customization menu.
Press to select Restore parameters.
Press OK to access the Restore parameters
menu.
Press OK to access Restore volumes.
Press OK to confirm (or to cancel).
The restored parameters confirmation message
will appear for a few instants.
The Restore parameters Volume menu will
appear again immediately after.
Press or to select the other menu items
or press three times to quit.
DS4091-002
BUTTON DISPLAY
user menu
Customization
Customization
Language
Customization
Display Contrast
Display Contrast
Contrast 03
Display Contrast
Contrast 02
Customization
Display Contrast
DD/MM/YYYY HH:MM
twice
BUTTON DISPLAY
user menu
Customization
Customization
Language
Customization
Restore parameters
Restore parameters
Volume
Restore?
0K=Yes X=No
Restore done
Restore parameters
Volume
DD/MM/YYYY HH:MM
three times
23