Makita CL183D Instruction Manual page 6

In order to drop dust sticking on the filter in
the capsule, tap the circumference of the
capsule 4 or 5 times with your hand.
2
015498
Now point suction inlet downwards, turn
capsule in direction of arrow in diagram,
and disconnect capsule slowly and straight.
NOTE:
Dust may spill out when opening
•
capsule. Be sure to keep capsule as
vertical as possible, and place a
garbage bag beneath capsule.
1
2
015499
Remove accumulated dust from inside of
capsule and off of prefilter.
1. Prefilter
2. Securing lip
015500
Twist prefilter in direction of arrow to
unfasten securing lip from cleaner unit and
then pull off prefilter.
1. Capsule
2. Suction inlet
1
1. Prefilter
2. Capsule
1
2
1
015501
Clean out fine dust from prefilter. Next,
remove filter, and lightly tap to dislodge dust.
Reassembly
1
015504
First, put filter without being peeled back. If
filter is put on incorrectly, dust will get into
motor housing, and cause motor failure.
Second, put prefilter over filter.
1
1. Securing lip
015505
Turn the set of filters, and adjust the
position of the two securing lips on prefilter,
and connect with the gutters of the cleaner
housing.
6
1. Prefilter
2. Filter
2
1. Prefilter
2. Filter
2
1