Sound Settings; Changing The Screen Unlock Method - Huawei P9 Plus User Manual

The above options may not be available on all phone models.

Sound settings

Change the incoming call and message ringtones or set the system alert sound and vibration
effects.
Go to Settings and then touch Sound. You can configure the following settings:
•
Volume: Adjust the ringtone, media, alarm, and call volume.
•
Silent mode: Once enabled, your phone will not ring when you receive an incoming call or
message, but the screen will still turn on. If you have also enabled Vibrate in silent mode, your
phone will vibrate to alert you of incoming calls and messages.
You can also enable or disable these features in the shortcuts tab. Touch
between Sound, Vibration, and Silent.
•
Select a ringtone under Call ringtone & vibration to change the ringtone. You can choose
from preset ringtones or a local music file. Turn on the switch to enable vibrations when your
phone rings.
•
Default notification tone: Choose a preset ringtone or a local music file as the notification
tone for messages, emails, and other notifications.
•
When using your phone to listen to music or watch videos, insert a headset and enable
Headset DTS mode for a stunning DTS multichannel surround sound experience.
•
Touch the switches under System to enable or disable dial pad touch tones, touch sounds,
screen lock sounds, screenshot tones, power on or off tones, and haptic feedback.
The above options may not be available on all phone models.

Changing the screen unlock method

Set a screen lock password to prevent unauthorized access to your phone.
Setting a screen unlock pattern
1
Open Settings.
2
Touch Screen lock & passwords
3
Connect at least four dots to create a screen unlock pattern, and then release your finger. Draw
your screen unlock pattern again to confirm.
4
Enter a backup PIN containing at least four digits. If you forget your screen unlock pattern, you
can enter the backup PIN to unlock the screen.
> Password > Pattern.
Settings
to switch
142