Huawei P9 Plus User Manual page 146

4
Select the appliance manufacturer from the list. Follow the onscreen instructions to calibrate
the remote control. Point the remote control at the the appliance and test the key buttons (such
as the power button).
5
If the appliance responds correctly, touch Yes, and then test another button. Once you have
finished testing, touch OK.
If the appliance does not respond to a button, touch
button. Follow the onscreen instructions to configure the button.
Customizing a remote control
If your appliance is not listed, you can configure a remote control manually.
This feature is not supported for air conditioners.
1
Open Smart Controller.
2
Touch > Customize.
3
Swipe left or right on the screen to select a remote control template (for example, a TV or set-
top box).
4
Touch the button that you want to configure.
5
Point the infra-red sensor on your phone at the sensor on your appliance's remote control.
Press and hold the corresponding button on the remote control for at least two seconds.
For optimum reception, ensure that your phone and the remote control are placed on a level
surface at a distance of no more than 5 cm from each other.
6
Once you have finished configuring the button, follow the onscreen instructions and touch
Save.
7
Repeat steps 4, 5, and 6 to configure other buttons. Touch
settings.
If the appliance does not respond to a button, touch
button. Follow the above steps to re-configure the button.
Deleting a remote control
1
Touch Smart Controller.
2
Touch and hold the remote control you want to delete, and then touch Delete.
3
Touch Delete.
, and then touch the corresponding
to save the remote control
, and then touch the corresponding
Tools
139