Advertisement
Quick Links
Advertisement
Related Manuals for XK X260
Summary of Contents for XK X260
- Page 2 X260-01 X260-03 X260-13 X260-04 X260-10 X260-20 X260-17 X260-12 X260-15C X260-15AC X260-22 X260-14 Replacement Replacement Screen 5.8G Camera X260-23 X260-08 X260-24 X260-06 X260 Lamp Cover X260-11 X260 Copper Pinion Gear...
-
Page 3: X260
X250-28 X250-27... -
Page 4: X260
For the latest information please visit our company website sole discretion of our company. For the latest information please visit our company website www.xk-innovations.com www.xk-innovations.com Read the entire instruction manual to become familiar with the features of the product before operating. -
Page 5: X260
Thank you for choosing this XK product. In order to make the quadcopter easier to control please carefully read the entire manual. Please keep the manual to hand for reference of future adjustments and maintenance. Before your first flight please take time to carefully read this manual as it contains important flight information which will help your first flight to be an enjoyable experience. -
Page 6: X260
The Battery charger included with the X260 has been designed to safely charge the LiPo battery. CAUTION: All instructions and warnings must be followed exactly. Mishandling of LiPo batteries can result in fire, personal injury and/or property damage. 1. By handling, charging or using the included LiPo battery you assume all risks associated with lithium batteries. - Page 7 1-cell 3.7V variable rate DC LiPo charger Instructions: Only charge with the supplied XK LiPo charger, never charge the LiPo battery unattended. 1. Plug the charger into the wall socket. 2. Plug the Lithium Polymer battery plug into the charger jack, as shown in figure below.
- Page 8 The Transmitter will make a constant beeping while it is binding to the X260. Once bound the transmitter will stop beeping and the X260 LED’s will change from flashing to solid to show the quadcopter is bound and ready to fly.
- Page 9 Names of Transmitter Parts Photo and Video functions are only applicable when you have a 5.8GHz Camera with a memory card connected. Camera Starts and stops video recording Direction control stick Throttle control stick Elevator/Pitch and Aileron/Roll and Rudder/Yaw Throttle trim Pitch trim Yaw trim Roll trim...
- Page 10 If you are not familiar with the controls of the X260 please take a few minutes to familiarize yourself with them before attempting your first flight. Throttle Rudder / Yaw Elevator / Pitch Aileron Flips and Rolls To activate the flip and roll you have to press the one key roll button, the transmitter will emit a beep to let you know the flip and roll function is enabled.
- Page 11 If the X260 loses connection with the transmitter, after 2-3 seconds the power to the motors will reduce and then cut to save the X260 from flying out of control. The LED’s on the X260 will also begin to flash.
- Page 12 Main rotor spins but quadcopter 1. Rotors are damaged 1. Replace the main rotors is unable to take off 2. Battery is very low 2. Charge or replace with a fully 3. Rotors incorrectly fitted charged battery 3. Check the rotors and correct if needed Strong vibrations on the Rotors damaged...