Advertisement
HOW TO OPERATE...cont'd.
AFTER THE FOOD IS FRIED:
1.
Make sure to turn the temperature control knob to the OFF or 0
position and unplug the deep fryer.
2.
Do not move the deep fryer until it is cooled entirely.
3.
Allow the oil to cool completely before storing away.
How to replace the filters:
The filter should be changed every 6 months.
1.
Open and remove the filter cover.
2.
Take out both white and black filters.
3.
Throw out old filters and replace with new filters. Make sure the
White filter rests on the metal surface BELOW the black carbon
filter.
10
10
10
PART NAMES & CONTROL PANEL
Ginnys.com • 1 • 800.544.1590
Ginnys.com • 1.800.544.1590
CLEANING & CARE
1.
Remove the lid and basket.
WARNING: Before cleaning the deep fryer, make sure that it is
disconnected from the power outlet, make sure the unit and
the cooking oil has completely cooled. Oil retains its
temperature for a long period after use. Do not attempt
to carry or move the deep fryer while the oil is hot.
2.
Wait for the fryer to cool, lift out the Control Unit Assembly & Heating
element.
3.
Remove the oil tank and pour the oil into a container. It is
recommended to filter the oil after each use if you are to re-use the oil.
4.
After removing the oil tank, the fryer can be divided into several
separate assemblies to clean.
5.
The oil tank and the housing can be immersed into water to clean.
6.
Housing, Oil Tank, Basket are dishwasher safe, hand wash the lid
and filter
7.
The Control Unit & Heating Element should be wiped clean with
absorbent paper towels. Then use a damp cloth and mild soap to
clean.
WARNING: Do not immerse the Control Unit & Heating Element into
water to clean.
8.
Dry all parts thoroughly.
9.
Note: Do not use abrasive scrubbing brushes or chemical cleaners
to clean the unit.
PART NAMES & CONTROL PANEL
CLEANING & CARE
11
11
11
11
Advertisement
