Taking Pictures Using Burst Mode - Panasonic DMC-FX1GN Operating Instructions Manual

Taking Pictures using Burst Mode

Preparation
• Set the mode dial except for [
1
Switch the burst mode setting.
1
H
: High speed
H
;
: Low speed
L
;
No display (cancelled)
2
Take pictures.
• Keep pressing the shutter button
fully to activate the burst mode.
Recording pictures (basic)
]/[
1600
19
42
]. (P27)
¬ Suggestions/Tips ¬
ª Number of pictures recorded in
burst mode
Burst
speed
4 frames/
H
second
2 frames/
L
second
• It is possible to record 4 frames in
1 second in burst mode at a shutter
speed higher than 1/60th.
• If the flash is activated, you can record
only 1 frame.
• In Simple mode [
is fixed to Low. (P32)
• You cannot take pictures with audio in
the burst mode.
• When setting auto bracket and the
burst mode simultaneously, auto
bracket will be performed.
• Burst mode will not perform as
described if a MultiMediaCard is used
in place of an SD Memory Card. The
reading/writing speed of a
MultiMediaCard is slower than that of
an SD Memory Card.
Number of recordable
pictures
max.
7 frames
max.
(DMC-FX5)/
5 frames
8 frames
(DMC-FX1)
max.
7 frames
max.
(DMC-FX5)/
5 frames
8 frames
(DMC-FX1)
], the burst speed