After Every Treatment: Buff; Taking Care Of Your No!No - no!no! Micro Getting Started

F

After Every Treatment: Buff

Buffing exfoliates, removes treated hair and leaves your skin feeling smooth.
Without buffing, treated hair remains on the skin leaving a prickly feeling.
Hold the Buffer
> Firmly rub the Buffer in a circular and/or back and forth motion
over the treated area.
[FIGURE F]
When to Replace the Buffer
> When the pad feels smooth.
> When it is no longer buffing effectively.
24

Taking Care of Your no!no!

NOTE: Do not use any liquid to clean the device, Thermicon Tips or Rollers.
Keep the Thermicon Tips and Roller clean to lower the risk of malfunction
and prolong the life of the Tips.
1. Turn off your no!no!.
2. Remove the Thermicon Tip.
3. Gently brush the inside of the Tips clean.
4. Brush debris out and away from the socket and roller.
If any hair or debris falls into the socket, this may cause no!no! to malfunction.
Brush any particles out of the socket before beginning a treatment.
G H
[FIGURE G]
[FIGURE H]
25