Panasonic KX-HDV430 Operating Instructions Manual page 92

Appendix
Sub Item
VLAN
*1
Link Speed
*1 If a connection with Auto Negotiation fails, the connection will be made at either 10 Mbps/half duplex
or 100 Mbps/half duplex.
System Settings
Sub Item
*1
Set Time & Date
Authentication
*3
Access Code
ECO Mode
*4
Restart
*4
DSS Restart
*1 Availability depends on your phone system. Contact your administrator for further information.
*2 Max. 128 characters
*3 This item is displayed only during initial setup.
*4 The unit will restart even if it is being accessed through the Web user interface or on a call.
92
Description
Specifies the VLAN settings.
Specifies the Ethernet PHY
mode settings.
Description
Specifies the time and date of
the telephone.
Specifies the ID and password
for HTTP authentication.
Specifies the access code to
access the redirect server.
Selects whether to enable ECO
mode.
Restart the unit.
Restart any connected DSS
units.
Setting
Enable VLAN
Yes
No
IP Phone
–VLAN ID
–Priority
PC
–VLAN ID
–Priority
IP Phone
Auto
100M/Full
100M/Half
10M/Full
10M/Half
PC
Auto
100M/Full
100M/Half
10M/Full
10M/Half
Setting
–Date
–Time
*2
–ID
*2
–Password
Max. 16 characters
On
Off
—
—
Default
Enable VLAN:
No
IP Phone:
VLAN ID: 2
Priority: 7
PC:
VLAN ID: 1
Priority: 0
Auto
Default
—
Not stored
Not stored
Off
—
—