Securing The Throttle Cables; Adjusting The Throttle Grip - Craftsman 316.794011 Operator's Manual

Securing the Throttle Cables
1. Wrap a zip tie around the elbow tube and the throttle cables (Fig. 5).
2. Carefully tighten the zip tie. Do not crimp the throttle cables.
Adjusting the Throttle Grip
1. Move the throttle grip to a location on the upper blower tube
that provides the best grip (Fig. 6).
2. Tighten the two screws on the throttle grip with a T-20 Torx®
screwdriver until the throttle grip is secure (Fig. 6).
Elbow Tube
ThrottJe CabJes
Fig. 5
Zip Tie
ThrottJe Grip
Lower Blower Tube Upper Blower Tube
i' x J;
_ZI,, #-j :i
Screws
Fig. 6