Panasonic AW-E300 Operating Instructions Manual page 43

Shutter Speed Synchro-scan
OFF -
1/100 99.68 Hz
1/250 250.0 Hz
1/500 492.2 Hz
1/1 000 984.4 Hz
1/2 000 1.969 kHz
1/4 000 3.938 kHz
1/10 000 7.875 kHz
#4 CCD Read Out Mode Setting [Field/Frame:
FIELD/FRAME 1/FRAME2]
FIELD: CCD storage will be by field storage.
FRAME 1: Vertical resolution increases in frame
storage.
FRAME 2: Vertical resolution is raised without
increasing residual images by frame storage
and 1/60-second shutter speed.
#5 Gain Up Setting [Gain: AGC HIGH/AGC LOW/
0 dB - 30 dB/NIGHT EYE]
AGC LOW: The Auto Gain Up control with a maxi-
mum gain increase of about 18 dB adjusts the
luminance automatically.
AGC HIGH: The Auto Gain Up control with a maxi-
mum gain increase of about 30 dB operates. If
the luminance is still insufficient, the Night Eye
(digital gain up) also adjusts the luminance
automatically.
Required luminance ratio
1
2
4
8
16
32
64
160
-41-
0 dB: 0 dB should be selected in normal cases.
1 dB - 30 dB: Use this range if sufficient video out-
put cannot be obtained even when the lens iris
is opened in shooting dark scenes.
Night Eye: Sensitivity is increased by adding the
digital gain up to 30 dB.
Notes
• Only 0 dB, 9 dB, or 18 dB, AGC LOW, AGC HIGH
can be selected in case of using the RCU (RCB).
If the lens iris switch is at MANUAL, when operat-
ing the camera alone or when the iris switch on the
RCU (RCB, Hyblid control panel) is at AUTO, AGC
may not function.
• AGC HIGH when the AGC selection switch on the
hybrid control panel is at AGC.
• 0 dB when the manual gain switch on the hyblid
control panel is at LOW, 9 dB when it is at MID, or
18 dB when it is at HIGH.
Manual GAIN AGC
G A I N AUTO/AIW A W C
O P E R AT E H I G H A G C
A T W
M I D
P O W E R
L O W M A N U A
O N
M O D E S H U T T E R
SCENE
FILE
B
B A R E L C
1 .
2 .
1 / 1 0 0 3 .
O F F
4 .
C A M O F F
Hybrid Control Panel
G / L P H A S E
A B C
O N 9 0 1 8 0 S C H
0 2 7 0
O F F
T. P E D C A B L E C O M P
Y C