1. Manuals
  2. Brands
  3. Innovative Manuals
  4. Desktop
  5. WINSTON WORKSTATION
  6. Installation instructions manual

Innovative WINSTON WORKSTATION Installation Instructions Manual

For apple imac
Hide thumbs
Table of Contents

Advertisement

Quick Links

WINSTON WORKSTATION
.for.Apple.iMac
STEP 1 | COLUMN
...............................................................................................................Page.3
STEP 2 | MOUNTS
Freestanding.Base. . ............................................................................................................................................Page.4
Clamp.Mount............................................................................................................................................................Page.5
Thru.Mount. . ...............................................................................................................................................................Page.6
STEP 3 | WORK SURFACE
STEP 4 | CABLE MANAGEMENT
NOTE: Depending on your Winston Workstation
you may not receive all the parts shown within this instruction booklet.
Installation may require two people.
800.524.2744 www.LCDarms.com
®
............................................................................Page.7
...................................................Page.10
configuration,
®
INSTALLATION INSTRUCTIONS
3
2
PAGE 1 OF 11
1
4
© 2015 Innovative Office Products, LLC
P511767 REV B

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WINSTON WORKSTATION and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Innovative WINSTON WORKSTATION

Summary of Contents for Innovative WINSTON WORKSTATION

  • Page 1 Thru.Mount.................................Page.6 STEP 3 | WORK SURFACE ................Page.7 STEP 4 | CABLE MANAGEMENT ...........Page.10 NOTE: Depending on your Winston Workstation configuration, ® you may not receive all the parts shown within this instruction booklet. Installation may require two people.

  • Page 2: Parts List

    701312 111629-124 1/2-13 x 3" Set Screw Cable Retainer 10-32 x 1" FHSCS Cover 111735 701126 711467 111605-248 800.524.2744 www.LCDarms.com PAGE 2 OF 11 * Depending on your Winston Workstation configuration, ® you may not receive all parts shown above.

  • Page 3: Step 1 | Column

    STEP 1 COLUMN IMPORTANT: Do not pull excessively on cable – doing so may result in accidental actuation of column. Confirm cable is properly seated into position. Use 7/32" Allen wrench to press cable firmly into place. 800.524.2744 www.LCDarms.com PAGE 3 OF 11...

  • Page 4: Freestanding.base

    STEP 2 FREESTANDING BASE | MOUNTS Hang base plate over edge of Place work surface work surface to allow access on base plate to aid as a to countersunk holes. Side counterbalance. of base plate with felt pads should be face down. Note the orientation of column cable exit and base plate –...

  • Page 5: Clamp.mount

    STEP 2 CLAMP MOUNT | MOUNTS Note the orientation of column cable exit and mount – cable should exit in direction as shown. 7/32" 7/32" 800.524.2744 www.LCDarms.com PAGE 5 OF 11...

  • Page 6: Thru.mount

    STEP 2 THRU MOUNT | MOUNTS Note the orientation of column cable exit and mount – cable should exit in direction as shown. 7/32" 800.524.2744 www.LCDarms.com PAGE 6 OF 11 * The supplied mounting hardware may need to change depending upon mounting substrate.

  • Page 7: Step 3 | Work Surface

    STEP 3 WORK SURFACE Two people may be required to install work surface to column. One to hold the work surface and the second person to secure the column clamp. IMPORTANT: Tighten bolts evenly. Work surface clamp should sit flush against the column, ensure there are no gaps.
  • Page 8 STEP 3 WORK SURFACE Place the platform base on the work surface. Align the platform tabs at the back of the work surface as shown. 800.524.2744 www.LCDarms.com PAGE 8 OF 11...
  • Page 9 STEP 3 WORK SURFACE Choose from three height settings for your iMac. Note: In the lowest height setting, the shelf (item V) is not used. 800.524.2744 www.LCDarms.com PAGE 9 OF 11...

  • Page 10: Step 4 | Cable Management 10

    STEP 4 CABLE MANAGEMENT 800.524.2744 www.LCDarms.com PAGE 10 OF 11...

  • Page 11: Height Adjustment

    HEIGHT ADJUSTMENT Press button and hold. Lift up/down. Release to lock in place. Is your height adjust button not working? If so, make the adjustments below. Slide workstation so that the work surface hangs over desk edge to allow access to underneath the work surface.

Table of Contents