Fine Tuning; Skip - Panasonic TX-68P200A Operating Instructions Manual

Tuning Menu
Fine Tune
In areas of poor reception or constant interference a
slight adjustment to the tuning may improve the
picture quality.
Using the Front Panel
1. Select the Programme location number you
want to fine tune.
2. Push the button repeatedly until the Tuning
Mode is reached. (See page 22).
3. Push the or
Menu.
4. Push the button to access Fine Tune.
5. Push the or
station.
6. The television will fine tune in the direction
chosen by you.
7. Push the to store the selected station.
8. Push the button to return the television to
the Tuning Menu.
9. To return the television to normal operation
push the button on the remote control or
repeatedly push the
display appears.
Using the Remote Control
1. Select the Programme location number you
want to fine tune.
2. Push the Set Up ( ) button.
3. Push the or
Tuning Menu. (See page 22).
4. Push the or
Menu.
5. Push the or
Fine Tune.
6. Push the or
7. The television will fine tune in the direction
chosen by you.
8. To store the selected station, push the
9. Push the Set Up ( ) button twice to return the
television to the Set Up menu.
10. Push the button to return the television to
normal operation.
Canceling the Fine Tuning
To cancel the Fine Tuning follow the Manual Tune
procedure on page 25.
26
Button to access the Tuning
Button to fine tune the
button until the volume
button to select the
button to access the Tuning
button to select the
button to start the fine tune.

Skip

This option allows you to "Skip" (bypass) the unused or
undesired Programme Numbers. The Function is only
applicable when the Programme Number Up or down
buttons are Pushed. The use of the remote control Direct
Programme Number Buttons overrides the Skip function.
Using the Front Panel
1. Select the Programme location number you
want to "Skip"
2. Push the
Mode is reached. (See page 22).
3. Push the
Menu.
4. Push the
5. Push the
off.
6. To store the SKIP setting, push the
7. To return the television to normal operation
push the
repeatedly push the
display appears.
Using the Remote Control
1. Select the Programme location number you
want to "Skip".
2. Push the Set Up ( ) button.
3. Push the
Tuning Menu. (See page 22).
4. Push the
Menu.
5. Push the
SKIP.
6. Push the
7. To store the SKIP setting, push the
8. Push the
.
normal operation.
TUNING MENU
SYS SELECT
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP
button repeatedly until the Tuning
or Button to access the Tuning
button to select SKIP.
or Button to turn the SKIP on or
button on the remote control or
button until the volume
or button to access the
or button to select the Tuning
or button to select the
or button to turn SKIP on or off.
button to return the television to
AUSTRALIA
OFF
button.
button.