Table of Contents
Advertisement
Quick Links
To download the full installation and user manuals and register your product,
please visit:
www.DSC.com/m/29009530 or scan the QR code to the right.
HS2016/HS2016-4/HS2032/HS2064/HS2064 E/
HS2128/HS2128 E Alarm Panel V1.2
WARNING: This manual contains information on limitations regarding product use and function and
information on the limitations as to liability of the manufacturer. The entire manual should be care-
fully read.
User Guide
Advertisement
Table of Contents
Summary of Contents for NEO HS2128 E
-
Page 1: User Guide
To download the full installation and user manuals and register your product, please visit: www.DSC.com/m/29009530 or scan the QR code to the right. HS2016/HS2016-4/HS2032/HS2064/HS2064 E/ HS2128/HS2128 E Alarm Panel V1.2 User Guide WARNING: This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be care- fully read. -
Page 3: Table Of Contents
Table of Contents 1.0 Quick Reference 2.0 Understanding Your Keypad 2.1 Icon and LED Keypad Symbols 2.2 Keypad Models 3.0 The PowerSeries Neo Security System 3.1 General System Operation 3.2 Testing Your System 3.3 Monitoring 3.4 Maintenance 4.0 Arming the System 4.1 Arming the System (Infinite Exit Delay) 4.2 Away Arming the System with the Keypad 4.3 Exit Delay Time Restart... -
Page 4: Quick Reference
Chapter 1.0 Quick Reference 1.0 Quick Reference The PowerSeries Neo Alarm System uses shortcut keys to access options or features on all models of keypads. When using an LCD keypad, the PowerSeries Neo Alarm System additionally uses a menu based navigation system. The scroll keys can be used to [Scroll] through the list of options con- tained within the current menu. - Page 5 Chapter 1.0 Quick Reference Action Press Section Bypassing - All bypass commands begin with [*][1] + [Access Code*] 3.7.1 Bypass Individual Zones [3 Digit Zone #] Bypass All Open Zones [9][9][8] 3.7.1 Recall Last Bypass [9][9][9] 3.7.1 Clear Bypass [0][0][0] OR [Scroll] Bypass Options + [*] 3.7.1 + [Scroll] Clear Bypasses + [*] Program Bypass Group...
-
Page 6: Understanding Your Keypad
Chapter 2.0 Understanding Your Keypad 2.0 Understanding Your Keypad The PowerSeries Neo Alarm System supports a variety of wireless, hardwired and proximity sensor LCD, LED and Icon keypads. All keypads come equipped with the LED status lights described in section 1 "Quick Reference". HS2LCD series keypads display system messages on their LCD screen. -
Page 7: Keypad Models
Chapter 2.0 Understanding Your Keypad Chime This icon turns on when the Chime function key is pressed to enable Door Chime on the system. It will turn off when the chime function key is pressed again to disable Door Chime. OPEN This icon is used with clock digits 1 and 2 to indicate activated zones (not alarm) on the system. -
Page 8: The Powerseries Neo Security System
3.1 General System Operation Your security system is made up of a PowerSeries Neo control panel, one or more keypads and vari- ous sensors and detectors. The control panel will be mounted out of the way in a utility closet or in a basement. -
Page 9: Monitoring
Chapter 3.0 The PowerSeries Neo Security System 3.3 Monitoring This system is capable of transmitting alarms, troubles and emergency information. If you initiate an alarm by mistake, immediately call the central station to prevent an unnecessary response. Note: For CP-01 systems, the monitoring function must be enabled by the installer before it becomes functional. -
Page 10: Arming The System
Chapter 4.0 Arming the System 4.0 Arming the System The PowerSeries Neo system can be armed using a keypad, a 2-way wireless key or a proximity tag. 4.1 Arming the System (Infinite Exit Delay) In an attempt to reduce false alarms, your system is designed to notify you of an improper exit when arming the system. -
Page 11: Exit Delay Time Restart
Chapter 4.0 Arming the System To cancel the arming sequence, enter your [access code] or System Disarmed present your proximity tag to the keypad reader. No Alarm Memory Once the exit delay timer expires, thereby arming the system, System Armed the: in Away Mode Ready indicator turns off. -
Page 12: Arming The System With A 2-Way Wireless Key
Chapter 4.0 Arming the System 4.5.1 Arming the System with a 2-Way Wireless Key If configured, the PowerSeries Neo system can be armed using the following wireless keys: PG4929/PG8929/PG9929 PG4939/PG8939/PG9939 To Arm the System with a 2-way wireless key Press the desired Arming mode button anytime the system Ready indicator is on. -
Page 13: Emergency Keys
Chapter 5.0 Emergency Keys 5.0 Emergency Keys IMPORTANT: EMERGENCY USE ONLY! Pressing both the emergency keys generates a Fire, Medical, or Panic Alarm, and alerts the mon- itoring station. e.g., to generate a medical alarm press both of the medical alarm keys for 2 seconds and the display on an LCD keypad will show Hold down keys for Med. -
Page 14: Access Code Types
Note: When using 8-digit access codes, the minimum number of variations are: 2083333 for HS2016/HS2016-4 1388888 for HS2032 1052631 for HS2064/HS2128 200000 for HS2064 E 100000 for HS2128 E Additionally, there are no disallowed codes. Master By default the master code can access all partitions and can perform any keypad Code function. -
Page 15: Adding, Changing And Deleting Access Codes
Each configured user is assigned a number as follows: 01-48 for HS2016/HS2016-4 01-72 for HS2032 01-95 for HS2064/HS2128 001-500 for HS2064 E 0001-1000 for HS2128 E Access codes cannot be duplicated. To Add or Change User Access Codes LCD Display From the desired user press [*] or [1]. -
Page 16: Burglary Verification
Chapter 6.0 Access Code Types 6.2 Burglary Verification The Control Panel includes cross zone and sequential detection features that require a trip on two or more zones within a given time period, to generate a confirmed alarm and immediate police response. - Page 17 Chapter 6.0 Access Code Types Word Library Text Text Text Text Text Text Aborted 041 Communicator 081 Front 121 Memory 161 Screen 201 7 042 Computer 082 Furnace 122 Menu 162 Second 202 8 Access 043 Control 083 Gallery 123 Monoxide 163 Sensor 203 9 Active 044 Date...
-
Page 18: Trouble Conditions
Chapter 7.0 Trouble Conditions 7.0 Trouble Conditions Occasionally, you may have a problem with your Alarm Controller or telephone line. If this hap- pens, your Alarm Controller identifies the problem and displays an error message. Refer to the provided list when you see an error message on the display. If additional help is required, contact your distributor for service. - Page 19 Chapter 7.0 Trouble Conditions Trouble Trouble Trouble Trouble Trouble Description Notification Condition Types Level 2 Level 1 Level 3 Battery Trouble 02 The system has detected a bat- Low Battery tery trouble condition. Call (System for service. Label) No Battery service (Sys- tem Label) High Current...
- Page 20 Chapter 7.0 Trouble Conditions Trouble Trouble Trouble Trouble Trouble Description Notification Condition Types Level 2 Level 1 Level 3 Device Faults The system has detected an issue with one or more con- Heat nected devices. Call for ser- ...
- Page 21 Chapter 7.0 Trouble Conditions Trouble Trouble Trouble Trouble Trouble Description Notification Condition Types Level 2 Level 1 Level 3 Module Super- The system has detected a HSM2HOST 01 vision supervisory trouble condition Keypad Keypad 1-16 with one or more modules on Zone Zone the system.
- Page 22 Chapter 7.0 Trouble Conditions Trouble Trouble Trouble Trouble Trouble Description Notification Condition Types Level 2 Level 1 Level 3 Not Networked 12 The system has detected a net- Zone Zone label work trouble condition with 001-128 one or more modules on the Keypad Keypad 1-16 system.
-
Page 23: Safety Instructions
Chapter 8.0 Safety Instructions 8.0 Safety Instructions This equipment is stationary-fixed DIRECT PLUG-IN and must be installed by Service Persons only (Service Person is defined as a person having the appropriate technical training and experience necessary to be aware of hazards to which that person may be exposed in performing a task and of measures to minimize the risks to that person or other persons). - Page 24 This publication covers the following models: x = 9 (912-919MHz UL/ULC systems) 4 (433MHz) or 8 (868MHz). HS2016 HS2128 HS2LCDRF HS2LED HS2016-4 HS2128 E HS2ICN HS2LCDRFP HS2032 HS2TCHP HS2ICNP HS2LCDWF HS2064 HS2LCD...
-
Page 25: Eula
Chapter 9.0 EULA one copy per license installed at any given time. You 9.0 EULA may use the back-up copy solely for archival pur- poses. Except as expressly provided in this EULA, IMPORTANT - READ CAREFULLY: DSC Software You may not otherwise make copies of the purchased with or without Products and Components SOFTWARE PRODUCT, including the printed mater- is copyrighted and is purchased under the following... - Page 26 Chapter 9.0 EULA text incorporated into the SOFTWARE PRODUCT), THE ABOVE LIMITATION MAY NOT APPLY TO the accompanying printed materials, and any copies YOU. (d) DISCLAIMER OF WARRANTIES - THIS of the SOFTWARE PRODUCT, are owned by DSC WARRANTY CONTAINS THE ENTIRE or its suppliers.
-
Page 27: Installer Warning
Chapter 10.0 Installer Warning of flammable materials, overloaded electrical circuits, children playing with 10.0 Installer Warning matches or arson. Even if the smoke detector operates as intended, there may be circumstances Warning Please Read Carefully when there is insufficient warning to allow all occupants to escape in time to avoid injury or death. - Page 28 Chapter 10.0 Installer Warning Reverse Numbering (Decadic Signalling) Decadic signaling should not be used as it is being progressively phased out of the network. DTMF dial- ling is 100% available and it should always be used. Line Grabbing Equipment This equipment is set up to carry out test calls at pre-determined times.
-
Page 29: Reference Sheets
Chapter 11.0 Reference Sheets 11.0 Reference Sheets Fill out the following information for future reference and store this guide in a safe place. 11.1 System Information Mark if Buttons are Enabled [F] FIRE [M] Medical [P] PANIC The Exit Delay Time is _______ seconds. The Entry Delay Time is _______ seconds. -
Page 30: Access Code And Sensor/Zone Information
Chapter 12.0 Access Code and Sensor/Zone information 12.0 Access Code and Sensor/Zone information Master Code [01] : _________________________ Access Code Reference Sheet Code Access Code Code Access Code Code Access Code Code Access Code ... - Page 31 Chapter 12.0 Access Code and Sensor/Zone information Sensor/Zone Information Sensor Protected Area Sensor Type Sensor Protected Area Sensor Type ...
- Page 32 Chapter 12.0 Access Code and Sensor/Zone information Sensor Protected Area Sensor Type Sensor Protected Area Sensor Type ...
-
Page 33: Locating Detectors And Escape Plan
Chapter 13.0 Locating Detectors and Escape Plan 13.0 Locating Detectors and Escape Plan The following information is for general guidance only and it is recommended that local fire codes and regulations be consulted when locating and installing smoke and CO alarms. 13.1 Smoke Detectors Research has shown that all hostile fires in homes generate smoke to a greater or lesser extent. -
Page 34: Fire Escape Planning
Chapter 13.0 Locating Detectors and Escape Plan Figure 3a Figure 4 13.2 Fire Escape Planning There is often very little time between the detection of a fire and the time it becomes deadly. It is thus very important that a family escape plan be developed and rehearsed. Every family member should participate in developing the escape plan. -
Page 35: Carbon Monoxide Detectors
Chapter 13.0 Locating Detectors and Escape Plan Figure 5 13.3 Carbon Monoxide Detectors Carbon monoxide is colorless, odorless, tasteless, and very toxic, it also moves freely in the air. CO detectors can measure the concentration and sound a loud alarm before a potentially harmful level is reached. -
Page 36: Regulatory Agency Statements
Chapter 14.0 Regulatory Agency Statements 14.0 Regulatory Agency Statements FCC COMPLIANCE STATEMENT CAUTION: Changes or modifications not expressly approved by Digital Security Controls could void your authority to use this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 37 Chapter 14.0 Regulatory Agency Statements This device complies with FCC Rules Part 15 and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference that may be received or that may cause undesired operation. IC:160A –...
- Page 40 © 2016 Tyco Security Products. All Rights Reserved. Tech Support: 1-800-387-3630 (Canada & U.S.) or 905-760-3000 • www.dsc.com The trademarks, logos, and service marks displayed on this document are registered in the United States [or other countries]. Any misuse of the trademarks is strictly prohibited and Tyco Security Products will aggressively enforce its intellectual property rights to the fullest extent of the law, including pursuit of criminal prosecution wherever necessary.