Siemens VS Z3 Instruction Manual page 29

Changing the filter
20
• Once the (H)EPA filter has dried
completely (at least 24 hours),
insert it back into the appliance
and lock it in place.
• Close the rear flap.
After vacuuming fine dust particles
(e.g. gypsum, cement, etc.), clean
the motor protection filter by tap-
ping it out or, if necessary, replace
the motor protection filter and ex-
haust filter.
You can order a new filter from our
after-sales service using the fol-
lowing replacement part number:
577 383.
29