GE AVX10 Owner's Manual & Installation Instructions page 10

Horizontal Sliding Window Installation Instructions
3
Install the Air Conditioner in the Window
Cut two pieces of adhesive back foam seal to
A
the height of the window opening. Remove the
backing and apply to the vertical inside edges of
the window frame and the sliding window that
will rest against the air conditioner. Cut one
piece to the width of the window opening and
apply to the top inside edge of the window
frame.
Slide the air conditioner onto the support
B
platform. Be sure the side channel butts against
the vertical side edge of the window frame.
4
Secure the Window and Install the Window Side Gasket
Attach the window stopping clips on the top
A
and the bottom of the window frame (sliding
windows only).
Cut the foam window side gasket to the proper
B
length and stuff it between the 2 windows.
10
Drill two 1/8² holes in the window channel
C
frame through the existing holes in the bottom
bar. Screw 2 type C screws through these holes.
Adhesive back
foam seal
NOTES:
If the air conditioner does not fit securely, remove it and
readjust the leveling bolt.
Make sure the air conditioner is firmly anchored to the
window channel frame.
Stopping
clip
Window side gasket
Stopping clip
Bottom bar
Window channel frame