Dell 2000FP Service Manual page 5

Dell 2000FP LCD Monitor Service Guide
2.2.7 PC INTERFACE
(1)DDC
(2)DPMS
2.2.8 SHIPMENT CONDITIONS
(1) Shipment conditions
2.3 LCD MODULE
2.3.1 LCD MODULE
(1) Main specification
(2) Defects
(3) Display Degradation
2.4 FRONT OF SCREEN
2.4.1 Min. functional warm-up time
3 mins
2.4.2 Specification
(1) FOS associated with LCD
(2) Measurement conditions
(3) FOS reliability
2.5 MECHANICAL
2.5.1 INDUSTRIAL DESIGN
(1) Label and marking
2.5.2 MECHANICAL SPECIFICATIONS
(3) OSD
Format & Functionality
Special Indications
Type
Type
Power Consumption
5
Confidential
Engineering Specification
Main Specification 5 languages
See Appendix 4 – OSD Format-Function
See Appendix 5 – Special Indications
Monitor complies with VESA DDC standard, Version 2.0.
Required custom EDID files. Digital-Ver 1.3, Analog-
Ver1.3. See Appendix 7 – EDID Content
Monitor includes VESA DPMS feature
See Appendix 8 –Power State Maximums
Monitor is to be shipped with the setting described in
Appendix 17 – Shipment Conditions
See Appendix 9 – LCD Module Specifications
See Appendix 12 – LCD Module Defects
Over the life of the product, variation parameters defined
in Appendix 12 will not vary.
See Appendix 13 – FOS (front of screen) Specifications
Module performance
See Appendix 14 – FOS Notes
Over the life of the product, parameters defined in
Appendix 13 and 14 will not vary, excluding any
parameters depending on CCFL operation.
See Appendix 2 – Labels and Markings. All labels and
markings must be legible and sharp, positioned as shown
in the drawings, and properly aligned. Using the
time/distance criteria as given for the cosmetic
inspection in Appendix 10- Mechanical , no missing parts
of the characters or the DELL logo will be observed. All
labels and marking must be approved by DELL.