Appendix 11 - Regulatories - Dell 2000FP Service Manual

Dell 2000FP LCD Monitor Service Guide
Dimensions
ITEMS
Monitor weight
Footprint W×D
Cabinet dimension W×H×D
Bezel opening
Monitor height
Tilt
Cosmetic inspection shall be performed under specific time, distance, and lighting requirements as detailed below. This is
to be the first test performed on any new product, and is to be performed under normal lighting of 500 lux as measured
perpendicular to the work surface, and 250 lux as measured perpendicular to the center of the display screen, per ISO 9241-3,
unless otherwise specified. No magnification is to be used except in the case of measuring LCD polarizer or screen defects.
During a visual inspection, a judgment must be made as to whether or not the end user would consider the flaw(s) objectionable.
During this inspection, only visual qualities are to be considered. The unit shall exhibit no objectionable defects under the
following inspection time and viewi ng distance criteria:
- Front panels: Inspect for 10 seconds at viewing distance of 500 mm.
- All other sides: Inspect for 5 seconds each at a viewing distance of 500 mm.
The following items are unacceptable if found during the time given for the inspection:
1. Missing parts.
2. Deformed case parts, control knobs, feet, or other parts.
3. Broken case or other parts.
4. Scratches greater than 0.5mm wide, or greater than 10 mm long, or greater than 0.2 mm deep.
5. Any scratches on the painted surface of any panel which allows the substrate material to show through
6. Any dirt or finger print
Appendix 11 – Regulatories
Safety
P
UL
P
CSA
P
TUV
P
Nemko
Semko
Demko
Fimko
P
DHHS
P
CCIB
P
Other
EMC
P
FCC
P
CE
P
VCCI
P
C-Tick
P
BCIQ (BSMI)
P
Other
Specification
Approximately 11.7kg
417.76×266.56mm
512.5(W) X509(H) X226.5 (D) mm
409.9(W)×308(H) mm
509mm
-5~+15 degree
Agencies
R1950, £Other
R950, £Other
RTUV, RGS, RErgo
CB report
Agencies
£FCC-A, RFCC-B
£VCCI-I, RVCCI-II
IC/ Canada
Engineering Specification
19
Confidential