Useful Information; Cancelling The Cordless Camera - Panasonic KX-TGA914EX Operating Instructions Manual

TGA914EX_for_TG9140EX_1(e).book Page 13 Tuesday, August 8, 2006 11:33 AM
Cancelling the cordless
camera
Using a handset registered to the same
base unit, you can cancel the registration of
a registered cordless camera.
1
J (centre of joystick) i L i L
2
Enter "335".
3
"Cancel Handset" i L
4
Select the cordless camera you want to
cancel. i t
L A Q is displayed with the selected item.
L To cancel a selected item, select it
again. i t
5
L i "Yes" i L
L "Please Wait..." will be displayed
and a long beep will sound.
6
{ih}

Useful Information

Registering the cordless camera
The included cordless camera and base unit
are preregistered. If for some reason the
cordless camera is not registered to the
base unit, register the cordless camera.
1
Base unit:
Press and hold {x} on the base unit for
about 3 seconds, until the registration
tone sounds.
2
Camera:
Press PROG. (program) on the back side
of the cordless camera with a pointed
object such as a pen until a beep sounds.
L When registration is completed
successfully, the cordless camera
beeps and the indicator stops flashing
red but remains lit in yellow-green
(page 5).
L If all registered handset start ringing in
step 2, press {x} to stop. Start again
from step 1.
13