15) To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Earthquake Sound Corp. | (510) 732-1000 | www.earthquakesound.com Specifications are subject to change without notice...
Pin 2 Tip = Positive/Red/Hot ↔ Simply adjust accordingly to your listening preference. Pin 3 Ring = Negative/Black/Cold CONNECT ONLY ONE INPUT SOURCE AT A TIME. Earthquake Sound Corp. | (510) 732-1000 | www.earthquakesound.com Specifications are subject to change without notice...
90 - 110° ° are aimed towards your ears when in listening position. ≥ 3 feet Avoid placing any large objects near the monitors and listening position. Earthquake Sound Corp. | (510) 732-1000 | www.earthquakesound.com Specifications are subject to change without notice...
If you are connecting an unbalanced signal to the monitor, cable or elsewhere). make sure to use Pin 2 for signal and tie Pin 1 and 3 together at the If the problem still persists at this point, please contact Earthquake Sound source end. for service.
Shipper claims regarding items damaged in transit must be presented to carrier. (C) Earthquake agrees to repair or replace - at our discretion - all such Earthquake Sound Corporation reserves the right to refuse products defective products/parts subject to the following provisions: that are improperly packaged.