Connections - Panasonic TX-60AS800E Operating Instructions Manual

Ensure that the TV does not hang over the edge of the
base.
Front Pedestal
Removing the Rear Pedestal from the TV
Be sure to remove the Rear Pedestal in the following
way when using the wall-hanging bracket or repacking
the TV.
1 Pull out the cover from the Rear Pedestal.
2 Remove the assembly screws
3 Lift up the TV at a slight angle from the Rear Pedestal
as shown.
(View from the side)
4 Attach the cover to the Rear Pedestal.
When using the wall-hanging bracket, remove the
Front Pedestal as well.
Rear Pedestal
from the TV.
A
(p. 24)

Connections

External equipment and cables shown are not
supplied with this TV.
Please ensure that the unit is disconnected from the
mains socket before attaching or disconnecting any
cables.
Check the terminal type and cable plugs are correct
when connecting.
Use a fully wired HDMI compliant cable.
Use a fully wired SCART cable.
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
Please also read the manual of the equipment being
connected.
Terminals
1
2
7 8 9
1 SD Card slot
2 Headphone jack (p. 12)
3 CI slot 1 - 2 (p. 12)
4 USB 1 - 3 port
5 HDMI1 - 3 (p. 11, 12)
6 DIGITAL AUDIO
7 ETHERNET (p. 11)
8 Satellite terminal (p. 10)
9 Terrestrial / cable terminal
10 AV1 (SCART) (p. 11)
11 AV2 (COMPONENT / VIDEO)
4
3
5
6
10 11 12
(p. 10)
(p. 11, 12)
13
9
English