Panasonic SV-AS10 Operating Instructions Manual page 55

_ Installing the USB driver (Only for Windows 98SE/Me)
Be sure to install the USB driver from the provided CD-ROM before connecting this unit to the PC. Close all
software programs (even permanently resident software) running on Windows.
1
Insert the CD-ROM.
• The Set Up menu starts automatically.
• If the Set Up menu does not start
automatically, double-click on the
[Autorun.exe] from the CD-ROM.
2
Click on [USB Driver].
3
If the [Restarting Windows] dialog
box appears, click on [Finish].
• After restarting the PC, installation of
the driver will be finished.
• If you click on icons other than the
USB driver, installation of the
respective software begins.
• For details about how to use the
supplied software, please refer to the
Help for the respective software.
• When starting [SD Viewer], if a
message stating that there is no
supported Memory Card is displayed,
confirm whether installation of the USB
driver has been finished.
55