Table of Contents
Advertisement
Setting Notification by Calling
Subscriber's
Main Command Menu
1
2
3
4
5
1
2
Message
Interview
Waiting
M.B.
Notification
Management
Setting
2
1
Change
Change
Device
M.W.
Status
Lamp
Status
Device No.
1
2
Schedule
Continuously
The VPS calls the preset telephone or beeper when a
new message is recorded in your mailbox. Set the fol-
lowing three parameters as appropriate.
*
6
The VPS can notify your beeper with the callback
Other
Features
number of the party who left the message. For this
feature to work, the telephone number stored on the
VPS for your beeper must include the beeper display
command.
3
External
Message
Setting Device Status
Delivery
For each device, the notification is enabled, disabled
or enabled on the preset schedule.
3
If you want to enable it on the schedule, contact your
Assign
Tel. No.
System Administrator as you are not allowed to set
the schedule by yourself.
1-3
3
Do not use
4
5
6
Step 6 —
1
Schedule (enabled on the schedule)
Same as the Message Waiting Lamp Status.
Press
2
to set the device status.
Enter the device number.
1
Press
–
3
to select the status.
Tip
Advertisement
Table of Contents
