Panasonic KX-PRS120E Operating Instructions Manual page 44

Answering System
5
MOKN a M N
Storing a phone number to which the
unit makes an alert call
n From the phonebook:
1
MMenuN (right soft key) #338
2
MbN: "Call Setting" a MOKN
3
MbN: "Notification to" a MOKN
a MAddN
4
MbN: "Phonebook" a MOKN
5
MbN: Select the desired phonebook
entry. a MOKN
6
MbN: Select the desired phone number.
a MOKN a M
n By entering a phone number:
1
MMenuN (right soft key) #338
2
MbN: "Call Setting" a MOKN
3
MbN: "Notification to" a MOKN
a MAddN
4
MbN: "Manual" a MOKN
5
Enter the desired name (16 characters
max.). a MOKN
6
Enter the desired number (24 digits
max.). a MOKN 2 times a M
Editing the set phone number
1
MMenuN (right soft key) #338
2
MbN: "Call Setting" a MOKN
3
MbN: "Notification to" a MOKN
4
MMenuN a MbN: "Edit" a MOKN
5
Edit the name if necessary (16 characters
max.). a MOKN
6
Edit the phone number if necessary (24
digits max.). a MOKN 2 times a M
Erasing the set phone number
1
MMenuN (right soft key) #338
2
MbN: "Call Setting" a MOKN
3
MbN: "Notification to" a MOKN
4
MMenuN a MbN: "Erase" a MOKN
44
PNQX6032YA_0529_ver110.pdf
N
N
N
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
44
5
MbN: "Yes" a MOKN a M
R The new message alert setting is
turned off.
Activating/inactivating the remote
access code to play messages
If you activate this feature, you must enter the
remote access code (page 45) to play the
new message from the new message alert
call. This is so that unauthorised parties
cannot listen to your messages. The default
setting is "Inactivate".
– "Inactivate": You can listen to the
message by pressing 4 to play new
messages (without entering the remote
access code).
– "Activate": You must enter your remote
access code (page 45) and then press 4
to play new message.
1
MMenuN (right soft key) #338
2
MbN: "Call Setting" a MOKN
3
MbN: "Remote Code" a MOKN
4
MbN: "Activate" or "Inactivate" a
MOKN a M N
Listening to messages
After you answer the new message alert, you
can listen to the messages as follows.
n When the remote access code is set to
"Inactivate":
Press 4 to play the new message during
the announcement.
n When the remote access code is set to
"Activate":
1
Enter the remote access code
(page 45) during the announcement.
2
Press 4 to play the new message.
Note:
R Within 10 seconds after listening to new
messages, you can press #9 during the
call to turn off the new message alert by a
call feature.
R Even if the unit makes a new message alert
call, the handset redial list does not show
the record.
N
2013/05/29 12:39:49